Allgemeine Werkstoffeigenschaften

2025

• Bezold A., Egan A., Völkl J., Karpstein N., Gaag T., Spiecker E., Göken M., Mills MJ., Neumeier S.:
  Localized phase transformation strengthening in CoNi-based superalloys
  In: Scripta Materialia 254 (2025), Art.Nr.: 116312
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2024.116312
• Karpstein N., Laplanche G., Saksena A., Zehl R., Bezold A., Horst OM., Bürger D., Kostka A., Zenk C., Neumeier S., Gault B., Ludwig A., Fries SG., Spiecker E.:
  Microscopic mechanism of the L12–D019 phase transformation in a Co-base single crystal superalloy
  In: Acta Materialia 282 (2025), Art.Nr.: 120416
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2024.120416

2024

• Arnoldt A., Österreicher JA., Schiffl A., Höppel HW.:
  Optimizing the Zn and Mg contents of Al–Zn–Mg wrought alloys for high strength and industrial-scale extrudability
  In: Journal of Materials Research and Technology 32 (2024), S. 2972-2982
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2024.08.014
• Bandorf J., Kirzinger A., Zenk C., Pang HT., Rae CM., Stone HJ., Neumeier S.:
  On the Evolution of the γ/γ′ Lattice Misfit and TCP Phase Precipitation in a Highly Alloyed Single Crystalline Ni-Base Superalloy
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_7
• Bezold A., Vollhüter J., Karpstein N., Lenz M., Subramanyam AP., Zenk C., Hammerschmidt T., Spiecker E., Göken M., Neumeier S.:
  Segregation-induced strength anomalies in complex single-crystalline superalloys
  In: Communications Materials 5 (2024), Art.Nr.: 8
  ISSN: 2662-4443
  DOI: 10.1038/s43246-024-00447-x
• Dölling J., Kuglstatter M., Prahl U., Höppel HW., Ortner P., Ott B., Kracun SF., Fehlbier M., Zilly A.:
  Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium
  In: Metals 14 (2024), S. 258
  ISSN: 2075-4701
  DOI: 10.3390/met14030258
• Dölling J., Kuglstatter M., Prahl U., Höppel HW., Ortner P., Ott B., Kracun SF., Fehlbier M., Zilly A.:
  Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium
  In: Metals 14 (2024), Art.Nr.: 258
  ISSN: 2075-4701
  DOI: 10.3390/met14030258
• Ernst B., Kubaschinski P., Schiessl A., Waltz M., Höppel HW., Tetzlaff U.:
  Comparison of the Young's modulus of the lead free solder alloy Sn-Ag3.8-Cu0.7 determined by hot tensile tests, ultrasonic measurements and β-Sn single crystal calculations
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 916 (2024), Art.Nr.: 147354
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2024.147354
• Felfer P., Ott B., Vorlaufer N.:
  Specimen preparation for atom probe tomography
  In: Praktische Metallographie 61 (2024), S. 848-864
  ISSN: 0032-678X
  DOI: 10.1515/pm-2024-0075
• Gaag T., Weidinger J., Bandorf J., Lux V., Wahlmann B., Neumeier S., Zenk C., Körner C.:
  Experimental Validation of Property Models and Databases for Computational Superalloy Design
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202401051
• Gebhart DD., Krapf A., Schretter L., Lassnig A., Merle B., Cordill MJ., Gammer C.:
  Cyclic Failure of a Cr–Au Bilayer on Polyimide: In Situ Transmission Electron Microscopy Observations of Interfacial Dislocation Mechanisms
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400251
• Ghorbani F., Kim MH., Ghalandari B., Zhang M., Varma SN., Schöbel L., Liu C., Boccaccini AR.:
  Architecture of β-lactoglobulin coating modulates bioinspired alginate dialdehyde-gelatine/polydopamine scaffolds for subchondral bone regeneration
  In: Acta Biomaterialia 181 (2024), S. 188-201
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2024.04.028
• Haußmann L., Bresler J., Neumeier S., Pyczak F., Göken M.:
  Interdiffusion Coefficients and Strengthening Effects of Nb, Ta, and Zr in the α2-Ti3Al Phase
  In: Journal of Phase Equilibria and Diffusion (2024)
  ISSN: 1547-7037
  DOI: 10.1007/s11669-024-01105-y
• Haußmann L., Neumeier S., Hausmann A., Bergamaschi E., Göken M.:
  Combinatorial Materials Research for the Development of New Advanced CoNi-Base Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_8
• Karpstein N., Lenz M., Bezold A., Zehl R., Wu M., Ludwig A., Laplanche G., Neumeier S., Spiecker E.:
  Unambiguous Stacking Fault Analysis for Unraveling Shearing Mechanisms and Shear-Based Transformations in the L12-Ordered γ′ Phase
  15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Proceedings of the 15th International Symposium on Superalloys 2024
  DOI: 10.1007/978-3-031-63937-1_4
  URL: https://link.springer.com/chapter/10.1007/978-3-031-63937-1_4
• Karpstein N., Wu M., Bezold A., Neumeier S., Cormier J., Spiecker E.:
  Temperature and Time Dependence of Elemental Segregation at Stacking Faults in Ni- and Co-Base Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_47
• Kim MH., Schöbel L., Geske M., Boccaccini AR., Ghorbani F.:
  Bovine serum albumin-modified 3D printed alginate dialdehyde-gelatin scaffolds incorporating polydopamine/SiO2-CaO nanoparticles for bone regeneration
  In: International Journal of Biological Macromolecules 264 (2024), Art.Nr.: 130666
  ISSN: 0141-8130
  DOI: 10.1016/j.ijbiomac.2024.130666
• Kirchmayer A., Hausmann A., Gabel S., Pröbstle M., Giese S., Göken M., Hünert D., Neumeier S.:
  The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024), S. 803-811
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07286-4
• Kirchmayer A., Hausmann D., Gabel S., Pröbstle M., Giese S., Göken M., Hünert D., Neumeier S.:
  The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024), S. 803-811
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07286-4
• Krapf A., Merle B., Gebhart DD., Reiter M., Lassnig A., Göken M., Cordill MJ., Gammer C.:
  Observing High-Cycle Fatigue Damage in Freestanding Gold Thin Films with Bulge Testing and Intermittent Transmission Electron Microscopy Imaging
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400216
• Kuglstatter M., Nitschky M., Hartmann A., Kümmel F., Fecher J., Felfer P., Höppel HW., Göken M.:
  Adapting Conductivity and Mechanical Properties through Layer Thickness Variation in Copper Niobium Laminated Metallic Composites
  In: Advanced Engineering Materials (2024), Art.Nr.: 2400266
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400266
• Neumeier S., Freund L., Bezold A., Köbrich M., Vollhüter J., Hausmann D., Solis C., Stark A., Schell N., Pyczak F., Felfer P., Gilles R., Göken M.:
  Advanced Polycrystalline γ′-Strengthened CoNiCr-Based Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2024)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-024-07319-6
• Ortner P., Schiffl A., Höppel HW.:
  Influence of a Preageing Treatment on the Cluster Formation and the Further Ageing Route in Al–Mg–Si Extrusion Alloys
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400623
• Ott B., Heller M., Monajem M., Felfer P.:
  Miniaturized gas exposure devices for atom probe experiments
  In: Microscopy research and technique (2024)
  ISSN: 1097-0029
  DOI: 10.1002/jemt.24573
• Pereira RM., Lohbauer U., Schulbert C., Göken M., Wurmshuber M., Campos TBM., Thim GP., Mieller B., Belli R.:
  Instantiations of Multiscale Kinship in Pressing‐Defect Distributions in Yttria‐Stabilized Zirconias by Powder Partitioning
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400139
• Prado L., Hayek S., Mazare AV., Erceg I., Sarau G., Christiansen S., Kamaleev M., Wurmshuber M., Lohbauer U., Goldmann W., Virtanen S., Tesler A.:
  Aerophilic Surfaces for Sustained Corrosion Protection of Metals Underwater
  In: Advanced Functional Materials (2024), Art.Nr.: 2407444
  ISSN: 1616-301X
  DOI: 10.1002/adfm.202407444
• Rothermel F., Thiele S., Jung C., Krapf A., Ilse SE., Merle B., Giessen H., Herkommer AM.:
  Fabrication and Characterization of a Magnetic 3D-printed Microactuator
  In: Advanced Materials Technologies (2024)
  ISSN: 2365-709X
  DOI: 10.1002/admt.202302196
• Schimbäck D., Kaserer L., Mair P., Mohebbi MS., Staron P., Maier-Kiener V., Letofsky-Papst I., Kremmer T., Palm F., Montes I., Höppel HW., Leichtfried G., Pogatscher S.:
  Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 905 (2024), Art.Nr.: 146102
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2024.146102
• Schlereth C., Weiser M., White E., Felfer P., Galetz M.:
  Oxide scale microstructure and failure mechanism of alloy 601 under varying metal dusting conditions
  In: Journal of Materials Science 59 (2024), S. 1087-1103
  ISSN: 0022-2461
  DOI: 10.1007/s10853-023-09260-2
• Schmuck K., Burtscher M., Alfreider M., Wurmshuber M., Kiener D.:
  Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites
  In: JOM Journal of the Minerals, Metals and Materials Society (2024)
  ISSN: 1047-4838
  DOI: 10.1007/s11837-023-06348-7
• Seynstahl A., Köbrich M., Rosnitschek T., Göken M., Tremmel S.:
  Enhancing the lifetime and vacuum tribological performance of PVD-MoS2 coatings by nitrogen modification
  In: Surface & Coatings Technology 477 (2024), Art.Nr.: 130343
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2023.130343
• Titz K., Vollhüter J., Randelzhofer P., Neumeier S., Göken M., Wahlmann B., Körner C.:
  Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302079
• Tsankova S., Nagel O., Bezold A., Grandjean B., Kirchmayer A., Göken M., Neumeier S.:
  Exploring Microstructural Characteristics, Mechanical Behavior, Hydrogen Embrittlement, and Long-Term Stability of Polycrystalline CoNiCr-Based Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_30
• Vorlaufer N., Josten J., Carl S., Göbel E., Soegaard A., Taccardi N., Spiecker E., Felfer P.:
  Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating
  In: Microscopy Research and Technique 87 (2024), S. 476-483
  ISSN: 1059-910X
  DOI: 10.1002/jemt.24448
• Wilmers J., Wurmshuber M., Gescher C., Graupp CM., Kiener D., Bargmann S.:
  Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallaby
  In: Acta Biomaterialia (2024)
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2024.07.004
• Winczewski JP., Zeiler S., Gabel S., Maestre D., Merle B., Gardeniers JG., Susarrey Arce A.:
  Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures
  In: Materials and Design 238 (2024), Art.Nr.: 112701
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2024.112701

2023

• Bahr A., Glechner T., Grimmer A., Wojcik T., Kutrowatz P., Podsednik M., Limbeck A., Heller M., Ramm J., Hunold O., Kolozsvári S., Polcik P., Ntemou E., Primetzhofer D., Felfer P., Riedl H.:
  High-temperature oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2-z coatings — Influence of Mo addition
  In: Surface & Coatings Technology 468 (2023), Art.Nr.: 129733
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2023.129733
• Bezold A., Amon L., Karpstein N., Spiecker E., Göken M., Neumeier S.:
  Recovery of superlattice stacking faults at high temperatures
  In: Scripta Materialia 222 (2023), Art.Nr.: 115005
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.115005
• Bezold A., Neumeier S.:
  Tailoring deformation mechanisms in polycrystalline CoNi-base superalloys for enhanced high temperature strength
  In: Scripta Materialia 226 (2023), Art.Nr.: 115250
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.115250
• Böhm T., Felfer P., Thiele S.:
  A Modular and Automated Serial Section Collection System for Ultramicrotomy and Subsequent Imaging
  In: Microscopy and Microanalysis 29 (2023), S. 212-218
  ISSN: 1431-9276
  DOI: 10.1093/micmic/ozac007
• Börner F., Keith M., Fougerouse D., Macauley C., Felfer P., Yokosawa T., Apeleo Zubiri B., Spiecker E.:
  Between defects and inclusions: The fate of tellurium in pyrite
  In: Chemical Geology 635 (2023), Art.Nr.: 121633
  ISSN: 0009-2541
  DOI: 10.1016/j.chemgeo.2023.121633
• Börner F., Keith M., Fougerouse D., Macauley C., Felfer P., Yokosawa T., Apeleo Zubiri B., Spiecker E.:
  Between defects and inclusions: The fate of tellurium in pyrite
  In: Chemical Geology 635 (2023), S. 121633
  ISSN: 0009-2541
  DOI: 10.1016/j.chemgeo.2023.121633
• Fritton M., Kümmel F., Kirchmayer A., Stark A., Hafez Haghighat M., Gehrmann B., Neumeier S., Gilles R.:
  Investigation of the Hot Deformation Behavior in VDM® Alloy 780 by In Situ High-Energy X-Ray Diffraction
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06942-5
• Fuchs C., Elitzer D., Höppel HW., Göken M., Zaeh MF.:
  Investigation into the influence of the interlayer temperature on machinability and microstructure of additively manufactured Ti-6Al-4V
  In: Production Engineering (2023)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-023-01192-9
• Förner A., Vollhüter J., Krapf A., Jamjoom AFA., Hausmann D., Wahlmann B., Fu Z., Körner C., Neumeier S., Göken M.:
  Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202300407
• Gebhart DD., Krapf A., Merle B., Gammer C., Cordill MJ.:
  Describing mechanical damage evolution through in situ electrical resistance measurements
  In: Journal of Vacuum Science & Technology A 41 (2023), Art.Nr.: 023408
  ISSN: 0734-2101
  DOI: 10.1116/6.0002362
• Goik P., Schiffl A., Höppel HW.:
  Formation of Peripheral Coarse Grain in Thin-Walled Al–Mg–Si Extrusion Profiles
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07144-3
• Goik P., Schiffl A., Höppel HW., Göken M.:
  The Role of Through-Thickness Variation of Texture and Grain Size on Bending Ductility of Al–Mg–Si Profiles
  Light Metals Symposium held at the TMS Annual Meeting and Exhibition, TMS 2023 (San Diego, CA, USA, 19. März 2023 - 23. März 2023)
  In: Stephan Broek (Hrsg.): Minerals, Metals and Materials Series 2023
  DOI: 10.1007/978-3-031-22532-1_77
• Hagen S., Haußmann L., Wahlmann B., Gebhardt F., Abu-Khousa B., Weiser M., Neumeier S., Zenk C., Virtanen S.:
  Influence of the W and Ta content on the High-Temperature Oxidation Resistance of Multinary Co/Ni-Based Superalloys at 1050 °C and 1150 °C
  In: High Temperature Corrosion of Materials (2023)
  ISSN: 2731-8397
  DOI: 10.1007/s11085-023-10183-1
• Holz H., Merle B.:
  Novel nanoindentation strain rate sweep method for continuously investigating the strain rate sensitivity of materials at the nanoscale
  In: Materials & Design 236 (2023), Art.Nr.: 112471
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2023.112471
• Hudak OE., Bahr A., Kutrowatz P., Wojcik T., Bohrn F., Solyom L., Schuster R., Shang L., Hunold O., Polcik P., Heller M., Felfer P., Ball G., Riedl H.:
  Pitting corrosion-Preferred chloride diffusion pathways in physical vapor deposited AlCrN coatings
  In: Corrosion Science 211 (2023)
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2022.110901
• Karpstein N., Lenz M., Bezold A., Wu M., Neumeier S., Spiecker E.:
  Reliable identification of the complex or superlattice nature of intrinsic and extrinsic stacking faults in the L12 phase by high-resolution imaging
  In: Acta Materialia 260 (2023), Art.Nr.: 119284
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2023.119284
• Khanchandani H., Rolli R., Schneider HC., Kirchlechner C., Gault B.:
  Hydrogen embrittlement of twinning-induced plasticity steels: Contribution of segregation to twin boundaries
  In: Scripta Materialia 225 (2023), Art.Nr.: 115187
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.115187
• Khanchandani H., Zeiler S., Strobel L., Göken M., Felfer P.:
  A Carbon-Stabilized Austenitic Steel with Lower Hydrogen Embrittlement Susceptibility
  In: Steel Research International (2023)
  ISSN: 1611-3683
  DOI: 10.1002/srin.202300372
• Kiener D., Wurmshuber M., Alfreider M., Schaffar GJ., Maier-Kiener V.:
  Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions
  In: Current Opinion in Solid State & Materials Science 27 (2023), Art.Nr.: 101108
  ISSN: 1359-0286
  DOI: 10.1016/j.cossms.2023.101108
  URL: https://www.sciencedirect.com/science/article/pii/S1359028623000530
• Kirchmayer A., Pröbstle M., Huenert D., Neumeier S., Göken M.:
  Influence of Grain Size and Volume Fraction of η/δ Precipitates on the Dwell Fatigue Crack Propagation Rate and Creep Resistance of the Nickel-Base Superalloy ATI 718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07001-3
• Kirchmayer A., Weiser M., Randelzhofer P., Freund L., Gehrmann B., Haghighat MH., Huenert D., Göken M., Neumeier S.:
  Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06956-z
• Krapf A., Gebhart DD., Gammer C., Cordill MJ., Merle B.:
  Creep-dominated fatigue of freestanding gold thin films studied by bulge testing
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 887 (2023), Art.Nr.: 145759
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2023.145759
• Kuczyk M., Zawischa M., Krülle T., Vollhüter J., Zeiler S., Leonhardt M., Kaspar J., Zimmer O., Göken M., Leyens C., Zimmermann M.:
  In situ mechanical testing of hard yet tough high entropy nitride coatings deposited on compliant steel substrates
  In: Thin Solid Films 787 (2023), Art.Nr.: 140137
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2023.140137
• Köbrich M., Förner A., Volz N., Zenk C., Fries SG., Göken M., Neumeier S.:
  Influence of refractory and platinum group metals on the microstructure and thermo-physical properties of Co-Al-W-based superalloys
  In: Journal of Alloys and Compounds 947 (2023), Art.Nr.: 169542
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2023.169542
• Marian M., Zambrano D., Rothammer B., Waltenberger V., Boidi G., Krapf A., Merle B., Stampfl J., Rosenkranz A., Gachot C., Grützmacher P.:
  Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers
  In: Surface & Coatings Technology 466 (2023), S. 129682
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2023.129682
• Morales LA., Bezold A., Förner A., Holz H., Merle B., Neumeier S., Körner C., Zenk C.:
  Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based alpha/alpha '/alpha '' Superalloy
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202201652
• Palm MS., Diepold B., Neumeier S., Höppel HW., Göken M., Zaeh MF.:
  Detection and effects of lack of fusion defects in Hastelloy X manufactured by laser powder bed fusion
  In: Materials & Design 230 (2023), Art.Nr.: 111941
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2023.111941
• Pohl P., Kuglstatter M., Göken M., Höppel HW.:
  Quantifying Co-Deformation Effects in Metallic Laminates by Loading–Unloading–Reloading Tensile Tests
  In: Metals 13 (2023), S. 1049
  ISSN: 2075-4701
  DOI: 10.3390/met13061049
• Pyczak F., Liang Z., Neumeier S., Rao Z.:
  Stability and Physical Properties of the L1(2)-gamma ' Phase in the CoNiAlTi-System
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06949-y
• Risse JH., Trempa M., Huber F., Höppel HW., Bartels D., Schmidt M., Reimann C., Friedrich J.:
  Microstructure and Mechanical Properties of Hypereutectic Al-High Si Alloys up to 70 wt.% Si-Content Produced from Pre-Alloyed and Blended Powder via Laser Powder Bed Fusion
  In: Materials 16 (2023), S. 657
  ISSN: 1996-1944
  DOI: 10.3390/ma16020657
• Rothammer B., Schwendner M., Bartz M., Wartzack S., Böhm T., Krauß S., Merle B., Schroeder S., Uhler M., Kretzer JP., Weihnacht V., Marian M.:
  Wear Mechanism of Superhard Tetrahedral Amorphous Carbon (ta-C) Coatings for Biomedical Applications
  In: Advanced Materials Interfaces 10 (2023), S. 1 - 17
  ISSN: 2196-7350
  DOI: 10.1002/admi.202202370
  URL: https://onlinelibrary.wiley.com/doi/10.1002/admi.202202370
• Sasidhar K., Khanchandani H., Zhang S., Kwiatkowski da Silva A., Scheu C., Gault B., Ponge D., Raabe D.:
  Understanding the protective ability of the native oxide on an Fe-13 at% Cr alloy at the atomic scale: A combined atom probe and electron microscopy study
  In: Corrosion Science 211 (2023), Art.Nr.: 110848
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2022.110848
• Seligmann B., Alfreider M., Wurmshuber M., Kiener D.:
  Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures
  In: Advanced Engineering Materials 25 (2023), Art.Nr.: 2201209
  ISSN: 1438-1656
  DOI: 10.1002/adem.202201209
• Vaid A., Zaiser M., Bitzek E.:
  Atomistic Simulations of Dislocation-Void Interactions in Concentrated Solid Solution Alloys
  In: Metals 13 (2023), Art.Nr.: 1655
  ISSN: 2075-4701
  DOI: 10.3390/met13101655
• Vollhüter J., Bezold A., Karpstein N., Köbrich M., Spiecker E., Göken M., Neumeier S.:
  Strain Rate-Dependent Anomalous Work Hardening of a Single-Crystalline CoNi-Base Superalloy
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-06966-5
• Vorlaufer N., Josten J., Carl S., Göbel E., Soegaard A., Taccardi N., Spiecker E., Felfer P.:
  Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating
  In: Microscopy Research and Technique 87 (2023), S. 476-483
  ISSN: 1059-910X
  DOI: 10.1002/jemt.24448
• Weiser M., Olszta MJ., Engelhard MH., Zhu Z., Schreiber DK.:
  Visualizing oxygen transport pathways during intergranular oxidation in Ni-Cr
  In: npj Materials Degradation 7 (2023), Art.Nr.: 70
  ISSN: 2397-2106
  DOI: 10.1038/s41529-023-00387-w
• Winczewski JP., Zeiler S., Gabel S., Susarrey-Arce A., Gardeniers JG., Merle B.:
  Exploring the mechanical properties of additively manufactured carbon-rich zirconia 3D microarchitectures
  In: Materials & Design 232 (2023), Art.Nr.: 112142
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2023.112142
• Wolf M., de Oliveira A., Taccardi N., Maisel S., Heller M., Khan Antara S., Soegaard A., Felfer P., Görling A., Haumann M., Wasserscheid P.:
  Dry reforming of methane over gallium-based supported catalytically active liquid metal solutions
  In: Communications Chemistry 6 (2023), Art.Nr.: 224
  ISSN: 2399-3669
  DOI: 10.1038/s42004-023-01018-w
• Wurmshuber M., Alfreider M., Wurster S., Burtscher M., Pippan R., Kiener D.:
  Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten
  In: Acta Materialia 250 (2023), Art.Nr.: 118878
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2023.118878
• Wurmshuber M., Doppermann S., Wurster S., Jakob S., Balooch M., Alfreider M., Schmuck K., Bodlos R., Romaner L., Hosemann P., Clemens H., Maier-Kiener V., Kiener D.:
  Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications
  In: International Journal of Refractory Metals & Hard Materials 111 (2023), Art.Nr.: 106125
  ISSN: 0263-4368
  DOI: 10.1016/j.ijrmhm.2023.106125
• Wurmshuber M., Wilmers J., Kim J., Oh SH., Kiener D.:
  Lower hardness than strength: the auxetic composite microstructure of limpet tooth
  In: Acta Biomaterialia 166 (2023), S. 447-453
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2023.04.035
  URL: https://www.sciencedirect.com/science/article/pii/S1742706123002350?via=ihub
• Xue F., Bezold A., Volz N., Kirchmayer A., Zenk C., Neumeier S., Göken M.:
  Influence of the γ′ Volume Fraction on the High-Temperature Strength of Single Crystalline Co–Al–W–Ta Superalloys
  In: Crystals 13 (2023), Art.Nr.: 1095
  ISSN: 2073-4352
  DOI: 10.3390/cryst13071095
• Yang Z., Huber F., Krapf A., Merle B., Markl M., Schmidt M., Körner C.:
  Revealing bulk metallic glass crystallization kinetics during laser powder bed fusion by a combination of experimental and numerical methods
  In: Journal of Non-Crystalline Solids 619 (2023), Art.Nr.: 122532
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2023.122532
• Zauner L., Steiner A., Glechner T., Bahr A., Ott B., Hahn R., Wojcik T., Hunold O., Ramm J., Kolozsvári S., Polcik P., Felfer P., Riedl H.:
  Role of Si segregation in the structural, mechanical, and compositional evolution of high-temperature oxidation resistant Cr-Si-B2±z thin films
  In: Journal of Alloys and Compounds 944 (2023), Art.Nr.: 169203
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2023.169203

2022

• Akhlaghi M., Hock R., Dallmann J., Krapf A., Merle B., Hofsäss H., Körner C., Leineweber A.:
  Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C
  In: Journal of Alloys and Compounds 907 (2022)
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2022.164535
• Arnoldt AR., Schiffl A., Höppel HW., Oesterreicher JA.:
  Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082
  In: Materials Characterization 191 (2022)
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2022.112129
• Atila A., Ouldhnini Y., Ouaskit S., Hasnaoui A.:
  Atomistic insights into the mixed-alkali effect in phosphosilicate glasses
  In: Physical Review B 105 (2022), Art.Nr.: 134101
  ISSN: 0163-1829
  DOI: 10.1103/PhysRevB.105.134101
• Bezold A., Freund L., Förner A., Völkl J., Huber LK., Göken M., Neumeier S.:
  Deformation Mechanisms in Compositionally Complex Polycrystalline CoNi-Base Superalloys: Influence of Temperature, Strain-Rate and Chemistry
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06912-x
• Bezold A., Stone HJ., Rae CMF., Neumeier S.:
  In Situ Investigation of TCP Phase Formation, Stress Relaxation and gamma/gamma ' Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06713-2
• Bezold A., Volz N., Lenz M., Karpstein N., Zenk C., Spiecker E., Göken M., Neumeier S.:
  Quantification of the temperature-dependent evolution of defect structures in a CoNi-base superalloy
  In: Acta Materialia 227 (2022), Art.Nr.: 117702
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117702
• Bezold A., Volz N., Xue F., Neumeier S., Göken M.:
  Anomalous Work Hardening Behavior of a Single Crystalline Co-Base Superalloy
  In: Alloys 1 (2022), S. 243-253-253
  ISSN: 2674-063X
  DOI: 10.3390/alloys1030015
• Bykova E., Johansson E., Bykov M., Chariton S., Fei H., Ovsyannikov SV., Aslandukova A., Gabel S., Holz H., Merle B., Alling B., Abrikosov IA., Smith JS., Prakapenka VB., Katsura T., Dubrovinskaia N., Goncharov AF., Dubrovinsky L.:
  Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B2Dumbbells
  In: Chemistry of Materials 34 (2022), S. 8138-8152
  ISSN: 0897-4756
  DOI: 10.1021/acs.chemmater.2c00520
• Bykova E., Ovsyannikov S., Bykov M., Yin Y., Fedotenko T., Holz H., Gabel S., Merle B., Chariton S., Prakapenka VB., Dubrovinskaia N., Goncharov AF., Dubrovinsky L.:
  Synthesis, crystal structure, and properties of stoichiometric hard tungsten tetraboride, WB4
  In: Journal of Materials Chemistry A (2022)
  ISSN: 2050-7488
  DOI: 10.1039/d2ta02268k
• Diepold B., Schunk C., Kümmel F., Fey T., Prakash A., Höppel HW., Göken M.:
  Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101143
• Elitzer D., Jäger S., Höll C., Baier D., Varga R., Zaeh MF., Göken M., Höppel HW.:
  Development of Microstructure and Mechanical Properties of TiAl6V4 Processed by Wire and Arc Additive Manufacturing
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202201025
• Gabel S., Giese S., Webler R., Neumeier S., Göken M.:
  Microcantilever Fracture Tests of α-Cr Containing NiAl Bond Coats
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101429
• Gabel S., Merle B., Bitzek E., Göken M.:
  A new method for microscale cyclic crack growth characterization from notched microcantilevers and application to single crystalline tungsten and a metallic glass
  In: Journal of Materials Research (2022), S. 2061-2072
  ISSN: 0884-2914
  DOI: 10.1557/s43578-022-00618-x
• Gebhart DD., Krapf A., Gammer C., Merle B., Cordill MJ.:
  Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening
  In: Scripta Materialia 212 (2022), Art.Nr.: 114550
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.114550
• Glechner T., Bahr A., Hahn R., Wojcik T., Heller M., Kirnbauer A., Ramm J., Kolozsvari S., Felfer P., Riedl H.:
  High temperature oxidation resistance of physical vapor deposited Hf-Si-B-2 +/- z thin films
  In: Corrosion Science 205 (2022)
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2022.110413
• Göken M., Hangen UD.:
  nanomech 5
  In: International Journal of Materials Research 96 (2022), S. 1225-1225
  ISSN: 1862-5282
  DOI: 10.1515/ijmr-2005-0213
• Hagen S., Weiser M., Abu-Khousa B., Virtanen S.:
  Influence of the Co/Ni Ratio and Dendritic Segregations on the High-Temperature Oxidation Resistance of Multinary Co-Rich Superalloys at 850 °C and 1050 °C
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06620-6
• Hausmann D., Freund L., Solis C., Giese S., Göken M., Gilles R., Neumeier S.:
  Cracking during High-Temperature Deformation of a High-Strength Polycrystalline CoNi-Base Superalloy
  In: Metals 12 (2022)
  ISSN: 2075-4701
  DOI: 10.3390/met12091520
• Haußmann L., Burbaum B., Stoehr B., Förner A., Freund L., Göken M., Neumeier S.:
  Crack-Free Welding of a Co-Base Superalloy with High γ' Precipitate Fraction
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202200609
• Haußmann L., Neumeier S., Bresler J., Keim S., Pyczak F., Göken M.:
  Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys
  In: Metals 12 (2022), Art.Nr.: 752
  ISSN: 2075-4701
  DOI: 10.3390/met12050752
• Haußmann L., Yoo B., Jung C., Ryou K., Choi WS., Haußmann L., Yang S., Boll T., Neumeier S., Choi PP.:
  Directed energy deposition of γ/γ' Co-Al-W superalloys
  In: Additive Manufacturing 60C7 - 103287 (2022)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2022.103287
• Hiremath P., Melin S., Bitzek E., Olsson PA.:
  Effects of interatomic potential on fracture behaviour in single- and bicrystalline tungsten
  In: Computational Materials Science 207 (2022), Art.Nr.: 111283
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2022.111283
• Höppel HW., May J., Eisenlohr P., Göken M.:
  Strain-rate sensitivity of ultrafine-grained materials
  In: International Journal of Materials Research 96 (2022), S. 566-571
  ISSN: 1862-5282
  DOI: 10.3139/ijmr-2005-0101
• Khanchandani H., El-Zoka AA., Kim SH., Tezins U., Vogel D., Sturm A., Raabe D., Gault B., Stephenson LT.:
  Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale
  In: PLoS ONE 17 (2022), Art.Nr.: e0262543
  ISSN: 1932-6203
  DOI: 10.1371/journal.pone.0262543
• Krauß S., Seynstahl A., Tremmel S., Meyer B., Bitzek E., Göken M., Yokosawa T., Zubiri BA., Spiecker E., Merle B.:
  Structural reorientation and compaction of porous MoS2 coatings during wear testing
  In: Wear 500-501 (2022), Art.Nr.: 204339
  ISSN: 0043-1648
  DOI: 10.1016/j.wear.2022.204339
• Kuhn HA., Sockel HG.:
  Comparison between experimental determination and calculation of elastic properties of nickel-base superalloys between 25 and 1200 °c
  De Gruyter, 2022
  ISBN: 9783112495544
• Kümmel F., Magnier A., Wu T., Niendorf T., Höppel HW.:
  Residual Stresses in Ultrafine-Grained Laminated Metal Composites Analyzed by X-ray Diffraction and the Hole-Drilling Method
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202200274
• Liang Z., Neumeier S., Rao Z., Göken M., Pyczak F.:
  CALPHAD informed design of multicomponent CoNiCr-based superalloys exhibiting large lattice misfit and high yield stress
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 854 (2022), Art.Nr.: 143798
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.143798
• Liang Z., Paul JDH., Stark A., Bezold A., Neumeier S., Göken M., Pyczak F.:
  High-Temperature CoNi-Based Superalloys Strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): The Effect of Refractory Elements
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06795-y
• Lubauer J., Ast J., Göken M., Merle B., Lohbauer U., Belli R.:
  Resistance-curve envelopes for dental lithium disilicate glass-ceramics
  In: Journal of the European Ceramic Society (2022)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2022.01.013
• Luo N., Galgon F., Krauß S., Morales LA., Merle B., Zenk C., Körner C.:
  Microstructural evolution and mechanical properties in Zr–Cu–Al–Nb bulk metallic glass composites prepared by laser metal deposition
  In: Intermetallics 140 (2022), Art.Nr.: 107393
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2021.107393
• Luo N., Huber F., Ciftci N., Wahl L., Bezold A., Neumeier S., Uhlenwinkel V., Travitzky N., Schmidt M., Zenk C., Körner C.:
  Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 (2022), Art.Nr.: 143405
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.143405
• Maier-Kiener V., Lawrence SK., Merle B.:
  30 Years of Oliver-Pharr: Then, Now and the Future of Nanoindentation
  In: JOM Journal of the Minerals, Metals and Materials Society (2022)
  ISSN: 1047-4838
  DOI: 10.1007/s11837-022-05305-0
• Meier MS., Jones ME., Felfer P., Moody MP., Haley D.:
  Extending Estimating Hydrogen Content in Atom Probe Tomography Experiments Where H 2 Molecule Formation Occurs
  In: Microscopy and Microanalysis 28 (2022), S. 1231-1244
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621012332
• Messing GL., Bose S., Göken M., Morgan SE.:
  JMR early career scholars in materials science annual issue
  In: Journal of Materials Research 37 (2022), S. 1-1
  ISSN: 0884-2914
  DOI: 10.1557/s43578-021-00475-0
• Oh SH., Kim JK., Liu Y., Wurmshuber M., Peng XL., Seo J., Jeong J., Wang Z., Wilmers J., Soyarslan C., Kim J., Kittiwirayanon B., Jeong J., Kim HJ., Huh YH., Kiener D., Bargmann S., Gao H.:
  Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness
  In: Science Advances 8 (2022), Art.Nr.: eadd4644
  ISSN: 2375-2548
  DOI: 10.1126/sciadv.add4644
• Ouldhnini Y., Atila A., Ouaskit S., Hasnaoui A.:
  Density-Diffusion Relationship in Soda-Lime Phosphosilicate
  In: Journal of Non-Crystalline Solids 590 (2022), Art.Nr.: 121665
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2022.121665
• Schimmel S., Salamon M., Tomida D., Neumeier S., Ishiguro T., Honda Y., Chichibu SF., Amano H.:
  High-Energy Computed Tomography as a Prospective Tool for In Situ Monitoring of Mass Transfer Processes inside High-Pressure Reactors-A Case Study on Ammonothermal Bulk Crystal Growth of Nitrides including GaN
  In: Materials 15 (2022), S. 6165
  ISSN: 1996-1944
  DOI: 10.3390/ma15176165
• Schneider T., Moffitt J., Volz N., Müller D., Karl J.:
  Long-term effects of ilmenite on a micro-scale bubbling fluidized bed combined heat and power pilot plant for oxygen carrier aided combustion of wood
  In: Applied Energy 314 (2022), S. 118953
  ISSN: 0306-2619
  DOI: 10.1016/j.apenergy.2022.118953
• Solís C., Kirchmayer A., da Silva I., Kümmel F., Mühlbauer S., Beran P., Gehrmann B., Haghighat MH., Neumeier S., Gilles R.:
  Monitoring the precipitation of the hardening phase in the new VDM® Alloy 780 by in-situ high-temperature small-angle neutron scattering, neutron diffraction and complementary microscopy techniques
  In: Journal of Alloys and Compounds 928 (2022), Art.Nr.: 167203
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2022.167203
• Stückler M., Zálešák J., Müller T., Wurster S., Weissitsch L., Meier M., Felfer P., Gammer C., Pippan R., Bachmaier A.:
  Oxide-stabilized microstructure of severe plastically deformed CuCo alloys
  In: Journal of Alloys and Compounds 901 (2022), Art.Nr.: 163616
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2022.163616
• Taali S., Toroghinejad MR., Kuglstatter M., Höppel HW.:
  Grain boundary engineering in roll-bonded copper to overcome the strength-ductility dilemma
  In: Journal of Materials Research and Technology 17 (2022), S. 3198-3204
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2022.02.032
• Thompson Y., Zissel K., Förner A., Gonzalez-Gutierrez J., Kukla C., Neumeier S., Felfer P.:
  Metal fused filament fabrication of the nickel-base superalloy IN 718
  In: Journal of Materials Science (2022)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-022-06937-y
• Vaid A., Wei D., Bitzek E., Nasiri S., Zaiser M.:
  Pinning of extended dislocations in atomically disordered crystals
  In: Acta Materialia 236 (2022)
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.118095
• Wahlmann B., Bandorf J., Volz N., Förner A., Pröbstle J., Multerer K., Göken M., Markl M., Neumeier S., Körner C.:
  Numerical Design of CoNi-Base Superalloys With Improved Casting Structure
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06870-4
• Wallis D., Harris J., Böhm C., Wang D., Zavattieri P., Feldner P., Merle B., Pipich V., Hurle K., Leupold S., Hansen LN., Marin F., Wolf S.:
  Erratum: Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics (Mater. Adv. (2022) DOI: 10.1039/d1ma01031j)
  In: Materials Advances 3 (2022), S. 2598-
  ISSN: 2633-5409
  DOI: 10.1039/d2ma90020c
• Webler R., Baranova P., Karewar S., Möller J., Neumeier S., Göken M., Bitzek E.:
  On the influence of Al-concentration on the fracture toughness of NiAl: Microcantilever fracture tests and atomistic simulations
  In: Acta Materialia 234 (2022), Art.Nr.: 117996
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117996
• Winczewski J., Herrera M., Cabriel C., Izeddin I., Gabel S., Merle B., Susarrey Arce A., Gardeniers H.:
  Additive Manufacturing of 3D Luminescent ZrO2:Eu3+ Architectures
  In: Advanced Optical Materials (2022)
  ISSN: 2195-1071
  DOI: 10.1002/adom.202102758
• Wurmshuber M., Balooch M., Huang X., Hosemann P., Kiener D.:
  Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications
  In: Scripta Materialia 213 (2022), Art.Nr.: 114641
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.114641
• Wurmshuber M., Burtscher M., Doppermann S., Bodlos R., Scheiber D., Romaner L., Kiener D.:
  Mechanical performance of doped W–Cu nanocomposites
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 857 (2022), Art.Nr.: 144102
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.144102
• Wurmshuber M., Jakob S., Doppermann S., Wurster S., Bodlos R., Romaner L., Maier-Kiener V., Kiener D.:
  Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry
  In: Acta Materialia 232 (2022), Art.Nr.: 117939
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117939
• Yang Z., Wang H., Krauß S., Huber F., Merle B., Schmidt M., Markl M., Körner C.:
  Evolution of an industrial-grade Zr-based bulk metallic glass during multiple laser beam melting
  In: Journal of Non-Crystalline Solids 589 (2022), Art.Nr.: 121649
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2022.121649
• Yoo B., Jung C., Ryou K., Choi WS., Haußmann L., Yang S., Boll T., Neumeier S., Choi PP.:
  Directed energy deposition of gamma/gamma' Co-Al-W superalloys
  In: Additive Manufacturing 60 (2022)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2022.103287

2021

• Aschauer E., Wojcik T., Polcik P., Hunold O., Arndt M., Dalbauer V., Mayrhofer PH., Felfer P., Riedl H.:
  Ultra-high oxidation resistance of nano-structured thin films
  In: Materials & Design 201 (2021), Art.Nr.: 109499
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2021.109499
• Bezold A., Volz N., Lenz M., Zenk C., Spiecker E., Mills MJ., Göken M., Neumeier S.:
  Yielding behavior of a single-crystalline γ'-strengthened Co-Ti-Cr superalloy
  In: Scripta Materialia 200 (2021), S. 113928
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.113928
• Biermann H., Vinogradov A., Hartmann O., Hartmann O.:
  Fatigue damage evolution in a particulate-reinforced metal matrix composite determined by acoustic emission and compliance method
  In: International Journal of Materials Research 93 (2021), S. 719-723
  ISSN: 1862-5282
  DOI: 10.3139/ijmr-2002-0121
• Burtscher M., Zhao M., Kappacher J., Leitner A., Wurmshuber M., Pfeifenberger M., Maier-Kiener V., Kiener D.:
  High-temperature nanoindentation of an advanced nano-crystalline W/Cu composite
  In: Nanomaterials 11 (2021), Art.Nr.: 2951
  ISSN: 2079-4991
  DOI: 10.3390/nano11112951
• Chauraud D., Durinck J., Vernisse L., Smalley S., Drouet M., Coupeau C.:
  External stress as a way to control Au(111) reconstruction
  In: Surface Science 714 (2021), Art.Nr.: 121908
  ISSN: 0039-6028
  DOI: 10.1016/j.susc.2021.121908
• Diepold B., Neumeier S., Meermeier A., Höppel HW., Sebald T., Göken M.:
  Temperature-Dependent Dynamic Strain Aging in Selective Laser Melted 316L
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202001501
• Diepold B., Palm MS., Wimmer A., Sebald T., Höppel HW., Neumeier S., Göken M.:
  Rotating Scan Strategy Induced Anisotropic Microstructural and Mechanical Behavior of Selective Laser Melted Materials and Their Reduction by Heat Treatments
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100622
• Feldner P., Merle B., Göken M.:
  Breakdown of the superplastic deformation behavior of heterogeneous nanomaterials at small length scales
  In: Materials Research Letters 9 (2021), S. 41-49
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2020.1818323
  URL: https://www.tandfonline.com/doi/pdf/10.1080/21663831.2020.1818323
• Felfer P., Ott B., Monajem M., Dalbauer V., Heller M., Josten J., Macaulay C.:
  An Atom Probe with Ultra-Low Hydrogen Background
  In: Microscopy and Microanalysis (2021)
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621013702
• Förner A., Vollhüter J., Hausmann D., Arnold C., Felfer P., Neumeier S., Göken M.:
  Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-021-06516-x
• Gaag T., Ritter N., Peters A., Volz N., Gruber D., Neumeier S., Zenk C., Körner C.:
  Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys
  In: Metals 11 (2021), Art.Nr.: 1707
  ISSN: 2075-4701
  DOI: 10.3390/met11111707
• Gabel S., Giese S., Merle B., Sprenger I., Heilmaier M., Neumeier S., Bitzek E., Göken M.:
  Microcantilever Fracture Tests on Eutectic NiAl–Cr(Mo) In Situ Composites
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202001464
  URL: https://onlinelibrary.wiley.com/doi/epdf/10.1002/adem.202001464
• Gonzalez-Gutierrez J., Thompson Y., Handl D., Cano S., Schuschnigg S., Felfer P., Kukla C., Holzer C., Burkhardt C.:
  Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness
  In: Materials Letters 283 (2021)
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2020.128909
• Gsellmann M., Klünsner T., Mitterer C., Krobath M., Wurmshuber M., Leitner H., Ecker W., Marsoner S., Maier-Kiener V., Kiener D., Ressel G.:
  Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing
  In: Materials & Design 204 (2021), Art.Nr.: 109690
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2021.109690
• Hausmann D., Förner A., Pröbstle M., Huenert D., Felfer P., Göken M., Neumeier S.:
  Correlation Between Local Chemical Composition and Formation of Different Types of Ordered Phases in the Polycrystalline Nickel-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100558
• Haußmann L., Rehman HU., Matschkal D., Göken M., Neumeier S.:
  Solid solution strengthening of Mo, Re, Ta and W in Ni during high-temperature creep
  In: Metals 11 (2021), Art.Nr.: 1909
  ISSN: 2075-4701
  DOI: 10.3390/met11121909
• Josten J., Felfer P.:
  Atom Probe Analysis of Nanoparticles through Pick and Coat Sample Preparation
  In: Microscopy and Microanalysis (2021)
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621000465
• Kohlhepp M., Uggowitzer PJ., Hummel M., Höppel HW.:
  Formation of Die Soldering and the Influence of Alloying Elements on the Intermetallic Interface
  In: Materials 14 (2021), S. 1580
  ISSN: 1996-1944
  DOI: 10.3390/ma14071580
• Konrad J., Meißner RH., Bitzek E., Zahn D.:
  A Molecular Simulation Approach to Bond Reorganization in Epoxy Resins: From Curing to Deformation and Fracture
  In: ACS Polymers Au (2021), Art.Nr.: acspolymersau.1c00016
  ISSN: 2694-2453
  DOI: 10.1021/acspolymersau.1c00016
• Kümmel F., Höppel HW., Göken M.:
  Ultrafine-Grained Laminated Metal Composites: A New Material Class for Tailoring Cyclically Stressed Components
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100070
• Kümmel F., Kirchmayer A., Solís C., Hofmann M., Neumeier S., Gilles R.:
  Deformation mechanisms in Ni-based superalloys at room and elevated temperatures studied by in Situ neutron diffraction and electron microscopy
  In: Metals 11 (2021), Art.Nr.: 719
  ISSN: 2075-4701
  DOI: 10.3390/met11050719
• Liang Z., Göken M., Lorenz U., Neumeier S., Oehring M., Pyczak F., Stark A., Wang L.:
  Influence of small amounts of Si and Cr on the high temperature oxidation behavior of novel cobalt base superalloys
  In: Corrosion Science 184 (2021), Art.Nr.: 109388
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2021.109388
• Liang Z., Pyczak F., Stark A., Rao Z., Neumeier S., Göken M.:
  Breaking the continuity of the Al2O3 oxide scale by additions of Cr in Co-Al-W-based superalloys
  In: Corrosion Science 189 (2021), Art.Nr.: 109594
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2021.109594
• Liebig JP., Mackovic M., Spiecker E., Göken M., Merle B.:
  Grain boundary mediated plasticity: A blessing for the ductility of metallic thin films?
  In: Acta Materialia 215 (2021), Art.Nr.: 117079
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117079
  URL: https://www.sciencedirect.com/science/article/pii/S1359645421004596/pdfft?isDTMRedir=true&download=true
• Macauley C., Heller M., Rausch A., Kümmel F., Felfer P.:
  A versatile cryo-transfer system, connecting cryogenic focused ion beam sample preparation to atom probe microscopy
  In: PLoS ONE 16 (2021), Art.Nr.: e0245555
  ISSN: 1932-6203
  DOI: 10.1371/journal.pone.0245555
• Marian M., Feile K., Rothammer B., Bartz M., Wartzack S., Seynstahl A., Tremmel S., Krauß S., Merle B., Boehm T., Wang B., Wyatt BC., Anasori B., Rosenkranz A.:
  Ti3C2Tx Solid Lubricant Coatings in Rolling Bearings with Remarkable Performance beyond State-of-the-Art Materials
  In: Applied Materials Today 25 (2021), S. 1-9
  ISSN: 2352-9407
  DOI: 10.1016/j.apmt.2021.101202
  URL: https://www.sciencedirect.com/science/article/pii/S2352940721002663?dgcid=coauthor
• Matschkal D., Tuengerthal P., Lamm S., Göken M., Höppel HW., Felfer P.:
  Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography
  In: Metals 11 (2021), Art.Nr.: 1727
  ISSN: 2075-4701
  DOI: 10.3390/met11111727
• Merle B., Maier-Kiener V., Rupert TJ., Pharr GM.:
  Current trends in nanomechanical testing research
  In: Journal of Materials Research (2021)
  ISSN: 0884-2914
  DOI: 10.1557/s43578-021-00280-9
  URL: https://link.springer.com/content/pdf/10.1557/s43578-021-00280-9.pdf
• Misra A., Göken M., Mara NA., Beyerlein IJ.:
  Hierarchical and heterogeneous multiphase metallic nanomaterials and laminates
  In: Mrs Bulletin (2021)
  ISSN: 0883-7694
  DOI: 10.1557/s43577-021-00059-7
• Morgado FF., Katnagallu S., Freysoldt C., Klaes B., Vurpillot F., Neugebauer J., Raabe D., Neumeier S., Gault B., Stephenson LT.:
  Corrigendum to Revealing atomic-scale vacancy-solute interaction in nickel(Scripta Materialia (2021) 203, (114036) (S135964622100316X), (10.1016/j.scriptamat.2021.114036))
  In: Scripta Materialia 205 (2021), Art.Nr.: 114213
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.114213
• Morgado FF., Katnagallu S., Freysoldt C., Klaes B., Vurpillot F., Neugebauer J., Raabe D., Neumeier S., Gault B., Stephenson LT.:
  Revealing atomic-scale vacancy-solute interaction in nickel
  In: Scripta Materialia 203 (2021), Art.Nr.: 114036
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.114036
• Mukhopadhyay S., Sriram H., Zenk C., Didomizio R., Detor AJ., Hayes RW., Viswanathan GB., Wang Y., Mills MJ.:
  Creep behavior of compact γ′-γ′′ coprecipitation strengthened in718-variant superalloy
  In: Metals 11 (2021), Art.Nr.: 1897
  ISSN: 2075-4701
  DOI: 10.3390/met11121897
• Neumeier S., Bresler J., Zenk C., Haußmann L., Stark A., Pyczak F., Göken M.:
  Partitioning Behavior of Nb, Ta, and Zr in Fully Lamellar gamma/alpha(2) Titanium Aluminides and Its Effect on the Lattice Misfit and Creep Behavior
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100156
• Neumeier S., Pyczak F., Göken M.:
  The temperature dependent lattice misfit of rhenium and ruthenium containing nickel-base superalloys – Experiment and modelling
  In: Materials and Design 198 (2021), Art.Nr.: 109362
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2020.109362
• Oh HS., Odbadrakh K., Ikeda Y., Mu S., Körmann F., Sun CJ., Ahn HS., Yoon KN., Ma D., Tasan CC., Egami T., Park ES.:
  Element-resolved local lattice distortion in complex concentrated alloys: An observable signature of electronic effects
  In: Acta Materialia 216 (2021), Art.Nr.: 117135
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117135
• Ouldhnini Y., Atila A., Ouaskit S., Hasnaoui A.:
  Atomistic insights into the structure and elasticity of densified 45S5 bioactive glasses
  In: Physical Chemistry Chemical Physics (2021)
  ISSN: 1463-9076
  DOI: 10.1039/d1cp02192c
• Pohl P., Kümmel F., Schunk C., Serrano-Munoz I., Markötter H., Göken M., Höppel HW.:
  About the role of interfaces on the fatigue crack propagation in laminated metallic composites
  In: Materials 14 (2021), Art.Nr.: 2564
  ISSN: 1996-1944
  DOI: 10.3390/ma14102564
• Preiß E., Merle B., Xiao Y., Gannott F., Liebig JP., Wheeler JM., Göken M.:
  Applicability of focused Ion beam (FIB) milling with gallium, neon, and xenon to the fracture toughness characterization of gold thin films
  In: Journal of Materials Research (2021)
  ISSN: 0884-2914
  DOI: 10.1557/s43578-020-00045-w
  URL: https://link.springer.com/content/pdf/10.1557/s43578-020-00045-w.pdf
• Pugsley V., Korn G., Luyckx S., Sockel HG.:
  On localised corrosive attack, stress corrosion cracking and corrosion fatigue effects in a hardmetal cutting-tool material
  In: International Journal of Materials Research 93 (2021), S. 745-749
  ISSN: 1862-5282
  DOI: 10.3139/ijmr-2002-0125
• Raman N., Wolf M., Heller M., Heene-Würl N., Taccardi N., Haumann M., Felfer P., Wasserscheid P.:
  GaPt Supported Catalytically Active Liquid Metal Solution Catalysis for Propane Dehydrogenation-Support Influence and Coking Studies
  In: ACS Catalysis (2021), S. 13423-13433
  ISSN: 2155-5435
  DOI: 10.1021/acscatal.1c01924
• Rothammer B., Marian M., Neusser K., Bartz M., Böhm T., Krauß S., Schroeder S., Uhler M., Thiele S., Merle B., Kretzer JP., Wartzack S.:
  Amorphous Carbon Coatings for Total Knee Replacements—Part II: Tribological Behavior
  In: Polymers 13 (2021), S. 1 - 25
  ISSN: 2073-4360
  DOI: 10.3390/polym13111880
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_60bb59ba4432e
• Rothammer B., Neusser K., Marian M., Bartz M., Krauß S., Böhm T., Thiele S., Merle B., Detsch R., Wartzack S.:
  Amorphous Carbon Coatings for Total Knee Replacements—Part I: Deposition, Cytocompatibility, Chemical and Mechanical Properties
  In: Polymers 13 (2021), S. 1 - 23
  ISSN: 2073-4360
  DOI: 10.3390/polym13121952
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_60c364643981f
• Sadl M., Condurache O., Bencan A., Dragomir M., Prah U., Malic B., Deluca M., Eckstein U., Hausmann D., Khansur NH., Webber KG., Ursic H.:
  Energy-storage-efficient 0.9Pb(Mg1/3Nb2/3)O3–0.1PbTiO3 thick films integrated directly onto stainless steel
  In: Acta Materialia 221 (2021), Art.Nr.: 117403
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117403
• Seynstahl A., Krauß S., Bitzek E., Meyer B., Merle B., Tremmel S.:
  Microstructure, mechanical properties and tribological behavior of magnetron-sputtered mos2 solid lubricant coatings deposited under industrial conditions
  In: Coatings 11 (2021), Art.Nr.: 455
  ISSN: 2079-6412
  DOI: 10.3390/coatings11040455
• Sommerschuh M., Wirth J., Englisch S., Przybilla T., Apeleo Zubiri B., Pistor J., Merle B., Körner C., Göken M., Spiecker E.:
  A scale-bridging study of the influence of TCP phases on the mechanical properties of an additive manufactured Ni-base superalloy combining microcompression testing, X-ray nanotomography and TEM
  In: Microscopy and Microanalysis 27 (2021), S. 938-942
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621003603
• Tayebi Arasteh S., Monajem M., Christlein V., Heinrich P., Nicolao A., Boldaji HN., Lotfinia M., Evert S.:
  How Will Your Tweet Be Received? Predicting the Sentiment Polarity of Tweet Replies
  IEEE 15th International Conference on Semantic Computing (ICSC) (Laguna Hills, CA, 27. Januar 2021 - 29. Januar 2021)
  In: IEEE (Hrsg.): 2021 IEEE 15th International Conference on Semantic Computing (ICSC) 2021
  DOI: 10.1109/ICSC50631.2021.00068
  URL: https://ieeexplore.ieee.org/document/9364527
• Thompson Y., Polzer M., Gonzalez-Gutierrez J., Kasian O., Heckl JP., Dalbauer V., Kukla C., Felfer P.:
  Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100380
• Volz N., Xue F., Bezold A., Zenk C., Fries SG., Schreuer J., Neumeier S., Göken M.:
  Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-021-06353-y
• Volz N., Xue F., Zenk C., Bezold A., Gabel S., Subramanyam AP., Drautz R., Hammerschmidt T., Makineni SK., Gault B., Göken M., Neumeier S.:
  Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy
  In: Acta Materialia 214 (2021), S. 117019
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117019
• Volz N., Zenk C., Karpstein N., Lenz M., Spiecker E., Göken M., Neumeier S.:
  Creep properties and deformation mechanisms of single-crystalline gamma '-strengthened superalloys in dependence of the Co/Ni ratio
  In: Philosophical Magazine (2021)
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2021.2017051
• Wahl L., Weichelt M., Goik P., Schmiedeke S., Travitzky N.:
  Robocasting of reaction bonded silicon carbide/silicon carbide platelet composites
  In: Ceramics International 47 (2021), S. 9736-9744
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2020.12.113
• Wallis D., Harris J., Böhm C., Wang D., Zavattieri P., Feldner P., Merle B., Pipich V., Hurle K., Leupold S., Hansen LN., Marin F., Wolf S.:
  Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics
  In: Materials Advances (2021)
  ISSN: 2633-5409
  DOI: 10.1039/d1ma01031j
• Wang J., Kang E., Sultan U., Merle B., Inayat A., Graczykowski B., Fytas G., Vogel N.:
  Influence of Surfactant-Mediated Interparticle Contacts on the Mechanical Stability of Supraparticles
  In: Journal of Physical Chemistry C (2021)
  ISSN: 1932-7447
  DOI: 10.1021/acs.jpcc.1c06839
• Wang J., Schwenger J., Feldner P., Ströbel A., Herre P., Romeis S., Peukert W., Merle B., Vogel N.:
  Mechanics of colloidal supraparticles under compression
  In: Science Advances 7 (2021), Art.Nr.: eabj0954
  ISSN: 2375-2548
  DOI: 10.1126/sciadv.abj0954
• Weikert T., Wartzack S., Baloglu MV., Willner K., Gabel S., Merle B., Pineda F., Walczak M., Marian M., Rosenkranz A., Tremmel S.:
  Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation
  In: Surface & Coatings Technology 407 (2021), Art.Nr.: 126769
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2020.126769
  URL: http://www.sciencedirect.com/science/article/pii/S0257897220314390
• Wurmshuber M., Frazer D., Balooch M., Issa I., Bachmaier A., Hosemann P., Kiener D.:
  The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag
  In: Materials Characterization 171 (2021), Art.Nr.: 110822
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2020.110822
• Xie Z., Chauraud D., Bitzek E., Korte-Kerzel S., Guénolé J.:
  Laves phase crystal analysis (LaCA): Atomistic identification of lattice defects in C14 and C15 topologically close-packed phases
  In: Journal of Materials Research (2021)
  ISSN: 0884-2914
  DOI: 10.1557/s43578-021-00237-y
• Zhao M., Schlueter K., Wurmshuber M., Reitgruber M., Kiener D.:
  Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength
  In: Materials & Design 197 (2021), Art.Nr.: 109187
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2020.109187
• Zhu Y., Ameyama K., Anderson PM., Beyerlein IJ., Gao H., Kim HS., Lavernia E., Mathaudhu S., Mughrabi H., Ritchie RO., Tsuji N., Zhang X., Wu X.:
  Heterostructured materials: superior properties from hetero-zone interaction
  In: Materials Research Letters 9 (2021), S. 1-31
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2020.1796836

2020

• Atila A., Kbirou M., Ouaskit S., Hasnaoui A.:
  On the presence of nanoscale heterogeneity in Al70Ni15Co15 metallic glass under pressure
  In: Journal of Non-Crystalline Solids 550 (2020), Art.Nr.: 120381
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2020.120381
• Bach J., Stoiber M., Schindler L., Höppel HW., Göken M.:
  Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper
  In: Acta Materialia 186 (2020), S. 363-373
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.12.044
• Bezold A., Volz N., Xue F., Zenk CH., Neumeier S., Göken M.:
  On the Precipitation-Strengthening Contribution of the Ta-Containing Co3(Al,W)-Phase to the Creep Properties of γ/γ′ Cobalt-Base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 51 (2020), S. 1567-1574
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-05626-2
• Brandt S., Faßbender ML., Klemd R., Macauley C., Felfer P., Haase K.:
  Cumulate olivine: A novel host for heavy rare earth element mineralization
  In: Geology 49 (2020)
  ISSN: 0091-7613
  DOI: 10.1130/G48417.1
• Cautaerts N., Delville R., Stergar E., Pakarinen J., Verwerft M., Yang Y., Hofer C., Schnitzer R., Lamm S., Felfer P., Schryvers D.:
  The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study
  In: Acta Materialia 197 (2020), S. 184-197
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2020.07.022
• Diehl M., Wang D., Liu C., Rezaei Mianroodi J., Han F., Ma D., Kok PJ., Roters F., Shanthraj P.:
  Solving Material Mechanics and Multiphysics Problems of Metals with Complex Microstructures Using DAMASK—The Düsseldorf Advanced Material Simulation Kit
  In: Advanced Engineering Materials (2020), Art.Nr.: 1901044
  ISSN: 1438-1656
  DOI: 10.1002/adem.201901044
• Diepold B., Vorlaufer N., Neumeier S., Gartner T., Göken M.:
  Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718
  In: International Journal of Minerals, Metallurgy and Materials 27 (2020), S. 640-648
  ISSN: 1674-4799
  DOI: 10.1007/s12613-020-1991-6
• Fuger C., Schwartz B., Wojcik T., Moraes V., Weiss M., Limbeck A., Macauley C., Hunold O., Polcik P., Primetzhofer D., Felfer P., Mayrhofer PH., Riedl H.:
  Influence of Ta on the oxidation resistance of WB2−z coatings
  In: Journal of Alloys and Compounds (2020), Art.Nr.: 158121
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2020.158121
• Förner A., Giese S., Arnold C., Felfer P., Körner C., Neumeier S., Göken M.:
  Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
  In: Scientific Reports 10 (2020), Art.Nr.: 15153
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-72093-5
• Gabel S., Merle B.:
  Small-scale high-cycle fatigue testing by dynamic microcantilever bending
  In: MRS Communications (2020)
  ISSN: 2159-6859
  DOI: 10.1557/mrc.2020.31
  URL: https://link.springer.com/content/pdf/10.1557/mrc.2020.31.pdf
• Giese S., Bezold A., Pröbstle M., Heckl A., Neumeier S., Göken M.:
  The Importance of Diffusivity and Partitioning Behavior of Solid Solution Strengthening Elements for the High Temperature Creep Strength of Ni-Base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-06028-0
• Gulden F., Reinhold B., Gramstat S., Stich A., Tetzlaff U., Höppel HW.:
  Investigation of the run-in and corrosion behavior of a PEO-coated aluminum brake disc
  10th International Munich Chassis Symposium (Chassis.Tech Plus) (Munich)
  In: 10TH INTERNATIONAL MUNICH CHASSIS SYMPOSIUM 2019 (CHASSIS.TECH PLUS), WIESBADEN: 2020
  DOI: 10.1007/978-3-658-26435-2_43
• Guénolé J., Nöhring WG., Vaid A., Houlle F., Xie Z., Prakash A., Bitzek E.:
  Assessment and optimization of the fast inertial relaxation engine (FIRE) for energy minimization in atomistic simulations and its implementation in LAMMPS
  In: Computational Materials Science 175 (2020), Art.Nr.: 109584
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2020.109584
• Hausmann D., Solís C., Freund L., Volz N., Heinemann A., Göken M., Gilles R., Neumeier S.:
  Enhancing the high-temperature strength of a Co-base superalloy by optimizing the γ/γ' microstructure
  In: Metals 10 (2020), Art.Nr.: 321
  ISSN: 2075-4701
  DOI: 10.3390/met10030321
• Haußmann L., Neumeier S., Kolb M., Ast J., Mohanty G., Michler J., Göken M.:
  Local Mechanical Properties at the Dendrite Scale of Ni-Based Superalloys Studied by Advanced High Temperature Indentation Creep and Micropillar Compression Tests
  14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
  In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (Hrsg.): Minerals, Metals and Materials Series 2020
  DOI: 10.1007/978-3-030-51834-9_26
• He J., Zenk C., Zhou X., Neumeier S., Raabe D., Gault B., Makineni SK.:
  On the atomic solute diffusional mechanisms during compressive creep deformation of a Co-Al-W-Ta single crystal superalloy
  In: Acta Materialia 184 (2020), S. 86-99
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.11.035
• Höppel HW., Westermeyer M., Kümmel F., Göken M.:
  The Role of Interfaces on the Deformation Mechanisms in Bimodal Al Laminates Produced by Accumulative Roll Bonding
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000145
• Kabir A., Espineira-Cachaza M., Fiordaliso EM., Ke D., Grasso S., Merle B., Esposito V.:
  Effect of cold sintering process (CSP) on the electro-chemo-mechanical properties of Gd-doped ceria (GDC)
  In: Journal of the European Ceramic Society 40 (2020), S. 5612-5618
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2020.06.010
• Kabir A., Kyu Han J., Merle B., Esposito V.:
  The role of oxygen defects on the electro-chemo-mechanical properties of highly defective gadolinium doped ceria
  In: Materials Letters 266 (2020), Art.Nr.: 127490
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2020.127490
• Kalsar R., Yadav D., Sharma A., Brokmeier HG., May J., Höppel HW., Skrotzki W., Suwas S.:
  Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 797 (2020), Art.Nr.: 140088
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2020.140088
• Kirchmayer A., Lyu H., Pröbstle M., Houlle F., Förner A., Huenert D., Göken M., Felfer P., Bitzek E., Neumeier S.:
  Combining Experiments and Atom Probe Tomography-Informed Simulations on γ′ Precipitation Strengthening in the Polycrystalline Ni-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000149
• Krauß S., Schieß T., Göken M., Merle B.:
  Revealing the local fatigue behavior of bimodal copper laminates by micropillar fatigue tests
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 788 (2020), Art.Nr.: 139502
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2020.139502
• Kubacka D., Eggeler Y., Volz N., Neumeier S., Spiecker E.:
  Using Rapid Thermal Annealing for Studying Early Stages of High-Temperature Oxidation of Superalloys
  DOI: 10.1007/978-3-030-51834-9_74
• Lee S., Vaid A., Im J., Kim B., Prakash A., Guenole J., Kiener D., Bitzek E., Oh SH.:
  In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops
  In: Nature Communications 11 (2020), Art.Nr.: 2367
  ISSN: 2041-1723
  DOI: 10.1038/s41467-020-15775-y
• Lenz M., Wu M., He J., Makineni SK., Gault B., Raabe D., Neumeier S., Spiecker E.:
  Atomic Structure and Chemical Composition of Planar Fault Structures in Co-Base Superalloys
  14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
  In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (Hrsg.): Minerals, Metals and Materials Series 2020
  DOI: 10.1007/978-3-030-51834-9_90
• Lepple M., Ushakov SV., Lilova K., Macauley C., Fernandez AN., Levi CG., Navrotsky A.:
  Thermochemistry and phase stability of the polymorphs of yttrium tantalate, YTaO4
  In: Journal of the European Ceramic Society (2020)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2020.10.039
• Löffl C., Saage H., Göken M.:
  The influence of near service environmental conditions on the corrosion and LCF behaviour of a beta-stabilized γ-TiAl alloy
  In: Corrosion Science 175 (2020), Art.Nr.: 108885
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2020.108885
• Marian M., Song GC., Wang B., Fuenzalida VM., Krauß S., Merle B., Tremmel S., Wartzack S., Yu J., Rosenkranz A.:
  Effective usage of 2D MXene nanosheets as solid lubricant – Influence of contact pressure and relative humidity
  In: Applied Surface Science 531 (2020), S. 1-10
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2020.147311
  URL: https://www.sciencedirect.com/science/article/pii/S0169433220320687?dgcid=coauthor
• Marti N., Reller C., Macauley C., Löffler M., Reichert A., Reichbauer T., Vetter KM., Schmid B., Mclaughlin D., Leidinger P., Reinisch D., Vogl C., Mayrhofer K., Katsounaros I., Schmid G.:
  Ag2Cu2O3- a catalyst template material for selective electroreduction of CO to C(2+)products
  In: Energy and Environmental Science 13 (2020), S. 2993-3006
  ISSN: 1754-5692
  DOI: 10.1039/d0ee01100b
• Merle B., Higgins WH., Pharr GM.:
  Extending the range of constant strain rate nanoindentation testing
  In: Journal of Materials Research (2020)
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.408
  URL: https://link.springer.com/content/pdf/10.1557/jmr.2019.408.pdf
• Mughrabi H.:
  Revisiting “Steady-State” Monotonic and Cyclic Deformation: Emphasizing the Quasi-Stationary State of Deformation
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-019-05618-x
• Penk D., Müller J., Felfer P., Grosso R., Stamminger M.:
  Visualization Aided Interface Reconstruction
  VMV 2020, 25th International Symposium on Vision, Modeling, and Visualization (Tübingen, 28. September 2020 - 1. Oktober 2020)
• Schirmer T., Ließmann W., Macauley C., Felfer P.:
  Indium and antimony distribution in a sphalerite from the “burgstaetter gangzug” of the upper harz mountains pb-zn mineralization
  In: Minerals 10 (2020), S. 1-19
  ISSN: 2075-163X
  DOI: 10.3390/min10090791
• Stückler M., Weissitsch L., Wurster S., Felfer P., Krenn H., Pippan R., Bachmaier A.:
  Magnetic dilution by severe plastic deformation
  In: AIP Advances 10 (2020), Art.Nr.: 015210
  ISSN: 2158-3226
  DOI: 10.1063/1.5128058
• Tinoco HA., Hutař P., Merle B., Göken M., Kruml T.:
  Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge test
  18th International Conference on Fracture and Damage Mechanics, FDM 2019 (Rhodes, 16. September 2019 - 18. September 2019)
  In: Key Engineering Materials 2020
  DOI: 10.4028/www.scientific.net/KEM.827.196
• Travitzky N., Boccaccini AR., Göken M.:
  The Department of Materials Science and Engineering at the Friedrich-Alexander-University of Erlangen-Nürnberg
  In: Advanced Engineering Materials 22 (2020), Art.Nr.: 2000921
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000921
• Volz N., Zenk C., Halvaci T., Matuszewska K., Neumeier S., Göken M.:
  Castability and Recrystallization Behavior of γ′-Strengthened Co-Base Superalloys
  DOI: 10.1007/978-3-030-51834-9_88
• Wang YF., Huang CX., Fang XT., Höppel HW., Göken M., Zhu YT.:
  Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient
  In: Scripta Materialia 174 (2020), S. 19-23
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2019.08.022
• Xie Z., Shin J., Renner J., Prakash A., Gianola DS., Bitzek E.:
  Origins of strengthening and failure in twinned Au nanowires: Insights from in−situ experiments and atomistic simulations
  In: Acta Materialia 187 (2020), S. 166-175
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2020.01.038
• Xue F., Zenk C., Freund L., Neumeier S., Göken M.:
  Understanding raft formation and precipitate shearing during double minimum creep in a γ′-strengthened single crystalline Co-base superalloy
  In: Philosophical Magazine (2020)
  ISSN: 1478-6443
  DOI: 10.1080/14786435.2020.1836415
• Zenk C., Volz N., Bezold A., Huber LK., Eggeler Y., Spiecker E., Göken M., Neumeier S.:
  The Effect of Alloying on the Thermophysical and Mechanical Properties of Co–Ti–Cr-Based Superalloys
  DOI: 10.1007/978-3-030-51834-9_89
• Zenk C., Volz N., Zenk C., Felfer P., Neumeier S.:
  Impact of the Co/Ni-Ratio on Microstructure, Thermophysical Properties and Creep Performance of Multi-Component γ′-Strengthened Superalloys
  In: Crystals 10 (2020), S. 1058
  ISSN: 2073-4352
  DOI: 10.3390/cryst10111058
• Zhao M., Issa I., Pfeifenberger M., Wurmshuber M., Kiener D.:
  Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution
  In: Acta Materialia 182 (2020), S. 215-225
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.10.030
• Zomorodpoosh S., Volz N., Neumeier S., Roslyakova I.:
  Application of change-point analysis to the selection of representative data in creep experiments
  In: Journal of Physics Communications 4 (2020), S. 1-11
  ISSN: 2399-6528
  DOI: 10.1088/2399-6528/aba7ff

2019

• Ast J., Ghidelli M., Durst K., Göken M., Sebastiani M., Korsunsky AM.:
  A review of experimental approaches to fracture toughness evaluation at the micro-scale
  In: Materials and Design 173 (2019), Art.Nr.: 107762
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2019.107762
• Atila A., Ghardi EM., Hasnaoui A., Ouaskit S.:
  Alumina effect on the structure and properties of calcium aluminosilicate in the percalcic region: A molecular dynamics investigation
  In: Journal of Non-Crystalline Solids 525 (2019), Art.Nr.: 119470
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2019.119470
• Atila A., Ghardi EM., Ouaskit S., Hasnaoui A.:
  Atomistic insights into the impact of charge balancing cations on the structure and properties of aluminosilicate glasses
  In: Physical Review B 100 (2019)
  ISSN: 0163-1829
  DOI: 10.1103/PhysRevB.100.144109
• Bachmaier A., Hohenwarter A., Höppel HW., Ivanisenko J.:
  Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
  In: Advanced Engineering Materials 21 (2019), Art.Nr.: ARTN 1801073
  ISSN: 1438-1656
  DOI: 10.1002/adem.201801073
• Blum W., Dvorak J., Kral P., Eisenlohr P., Sklencka V.:
  Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu-Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 T-m
  In: Metals 9 (2019)
  ISSN: 2075-4701
  DOI: 10.3390/met9111150
• Blum W., Dvorak J., Kral P., Eisenlohr P., Sklenicka V.:
  Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 T-m
  In: Metals 9 (2019)
  ISSN: 2075-4701
  DOI: 10.3390/met9111149
• Bresler J., Neumeier S., Ziener M., Pyczak F., Göken M.:
  The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar gamma/alpha(2) titanium aluminides
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019), S. 46-53
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.11.152
• Bresler J., Neumeier S., Ziener M., Pyczak F., Göken M.:
  The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019), S. 46-53
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.11.152
• Bykov M., Chariton S., Fei H., Fedotenko T., Aprilis G., Ponomareva AV., Tasnádi F., Abrikosov IA., Merle B., Feldner P., Vogel S., Schnick W., Prakapenka VB., Greenberg E., Hanfland M., Pakhomova A., Liermann HP., Katsura T., Dubrovinskaia N., Dubrovinsky L.:
  High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re2(N2)(N)2 stable at ambient conditions
  In: Nature Communications 10 (2019), Art.Nr.: 2994
  ISSN: 2041-1723
  DOI: 10.1038/s41467-019-10995-3
• Böhm C., Feldner P., Merle B., Wolf S.:
  Conical nanoindentation allows azimuthally independent hardness determination in geological and biogenic minerals
  In: Materials 12 (2019), Art.Nr.: 1630
  ISSN: 1996-1944
  DOI: 10.3390/ma12101630
• Frydrych K., Kowalczyk-Gajewska K., Prakash A.:
  On solution mapping and remeshing in crystal plasticity finite element simulations: application to equal channel angular pressing
  In: Modelling and Simulation in Materials Science and Engineering 27 (2019)
  ISSN: 0965-0393
  DOI: 10.1088/1361-651X/ab28e3
• Giese S., Kern F., Macauley C., Neumeier S., Göken M.:
  Fracture resistance of yttria stabilized zirconia manufactured from stabilizer-coated nanopowder by micro cantilever bending tests
  In: Journal of the European Ceramic Society (2019)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2019.05.006
• Giese S., Neumeier S., Amberger-Matschkal D., Bergholz J., Vaßen R., Göken M.:
  Microtensile creep testing of freestanding MCrAlY bond coats
  In: Journal of Materials Research (2019)
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.169
• Giese S., Neumeier S., Bergholz J., Naumenko D., Quadakkers WJ., Vassen R., Göken M.:
  Influence of Different Annealing Atmospheres on the Mechanical Properties of Freestanding MCrAlY Bond Coats Investigated by Micro-Tensile Creep Tests
  In: Metals 9 (2019)
  ISSN: 2075-4701
  DOI: 10.3390/met9060692
• Glöckel F., Uggowitzer PJ., Felfer P., Pogatscher S., Höppel HW.:
  Influence of Zn and Sn on the precipitation behavior of new Al-Mg-Si alloys
  In: Materials 12 (2019), Art.Nr.: 2547
  ISSN: 1996-1944
  DOI: 10.3390/ma12162547
• Gonzalez-Gutierrez J., Thompson Y., Cano S., Felfer P., Kukla C., Holzer C.:
  Steel parts produced by material extrusion additive manufacturing, solvent debiding and sintering
  Materials Science and Technology 2019, MS and T 2019 (Portland, OR, 29. September 2019 - 3. Oktober 2019)
  In: MS and T 2019 - Materials Science and Technology 2019 2019
  DOI: 10.7449/2019/MST_2019_264_266
• Guillonneau G., Wheeler JM., Wehrs J., Philippe L., Baral P., Höppel HW., Göken M., Michler J.:
  Determination of the true projected contact area by in situ indentation testing
  In: Journal of Materials Research 34 (2019), S. 2859-2868
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.236
• Hou X., Krauß S., Merle B.:
  Additional grain boundary strengthening in length-scale architectured copper with ultrafine and coarse domains
  In: Scripta Materialia 165 (2019), S. 55-59
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2019.02.019
• Karewar S., Sietsma J., Santofimia MJ.:
  Effect of C on the Martensitic Transformation in Fe-C Alloys in the Presence of Pre-Existing Defects: A Molecular Dynamics Study
  In: Crystals 9 (2019)
  ISSN: 2073-4352
  DOI: 10.3390/cryst9020099
• Katnagallu S., Stephenson LT., Mouton I., Freysoldt C., Subramanyam APA., Jenke J., Ladines AN., Neumeier S., Hammerschmidt T., Drautz R., Neugebauer J., Vurpillot F., Raabe D., Gault B.:
  Imaging individual solute atoms at crystalline imperfections in metals
  In: New Journal of Physics 21 (2019)
  ISSN: 1367-2630
  DOI: 10.1088/1367-2630/ab5cc4
• Lamm S., Matschkal D., Göken M., Felfer P.:
  Impact of Mn on the precipitate structure and creep resistance of Ca containing magnesium alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 761 (2019), Art.Nr.: 137964
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2019.05.094
• Lenz M., Eggeler Y., Müller J., Zenk C., Volz N., Wollgramm P., Eggeler G., Neumeier S., Göken M., Spiecker E.:
  Tension/Compression asymmetry of a creep deformed single crystal Co-base superalloy
  In: Acta Materialia 166 (2019), S. 597-610
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.12.053
• Löffl C., Saage H., Göken M.:
  In situ X-ray tomography investigation of the crack formation in an intermetallic beta-stabilized TiAl-alloy during a stepwise tensile loading
  In: International Journal of Fatigue 124 (2019), S. 138-148
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2019.02.035
• Martić N., Reller C., Macauley C., Löffler M., Schmid B., Reinisch D., Volkova E., Maltenberger A., Rucki A., Mayrhofer K., Schmid G.:
  Paramelaconite-Enriched Copper-Based Material as an Efficient and Robust Catalyst for Electrochemical Carbon Dioxide Reduction
  In: Advanced Energy Materials (2019), Art.Nr.: 1901228
  ISSN: 1614-6832
  DOI: 10.1002/aenm.201901228
• Matschkal D., Kolb M., Neumeier S., Gao S., Hartmaier A., Durst K., Göken M.:
  New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures
  In: Materials & Design 183 (2019), Art.Nr.: 108090
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2019.108090
• McCarroll IE., Haley D., Thomas S., Meier M., Bagot PA., Moody MP., Birbilis N., Cairney JM.:
  The effect of hydrogen on the early stages of oxidation of a magnesium alloy
  In: Corrosion Science (2019), Art.Nr.: 108391
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2019.108391
• Merle B.:
  Creep behavior of gold thin films investigated by bulge testing at room and elevated temperature
  In: Journal of Materials Research 34 (2019), S. 69-77
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2018.287
• Merle B., Higgins WH., Pharr GM.:
  Critical issues in conducting constant strain rate nanoindentation tests at higher strain rates
  In: Journal of Materials Research (2019)
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.292
• Mueller T., Kapp MW., Bachmaier A., Felfer P., Pippan R.:
  Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion
  In: Acta Materialia 166 (2019), S. 168-177
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.12.028
• Preiß E., Lyu H., Liebig JP., Richter G., Gannott F., Gruber PA., Göken M., Bitzek E., Merle B.:
  Microstructural dependence of the fracture toughness of metallic thin films: A bulge test and atomistic simulation study on single-crystalline and polycrystalline silver films
  In: Journal of Materials Research 34 (2019), S. 3483-3494
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.262
  URL: https://www.cambridge.org/core/journals/journal-of-materials-research/article/microstructural-dependence-of-the-fracture-toughness-of-metallic-thin-films-a-bulge-test-and-atomistic-simulation-study-on-singlecrystalline-and-polycrystalline-silver-films/73FEF9FD56EFF314E1366003EFFE8C5B#
• Schreiner J., Götz-Neunhoeffer F., Neubauer J., Bergold S., Webler R., Volkmann S., Jansen D.:
  Advanced Rietveld refinement and SEM analysis of tobermorite in chemically diverse autoclaved aerated concrete
  In: Powder Diffraction (2019)
  ISSN: 0885-7156
  DOI: 10.1017/S0885715619000149
• Schunk C., Nitschky M., Höppel HW., Göken M.:
  Superior Mechanical Properties of Aluminum-Titanium Laminates in Terms of Local Hardness and Strength
  In: Advanced Engineering Materials 21 (2019), Art.Nr.: ARTN 1800546
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800546
• Thompson Y., Gonzalez-Gutierrez J., Kukla C., Felfer P.:
  Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel
  In: Additive Manufacturing 30 (2019), Art.Nr.: 100861
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.100861
• Vaid A., Guenole J., Prakash A., Korte-Kerzel S., Bitzek E.:
  Atomistic simulations of basal dislocations in Mg interacting with Mg17Al12 precipitates
  In: Materialia 7 (2019), Art.Nr.: 100355
  ISSN: 2589-1529
  DOI: 10.1016/j.mtla.2019.100355
  URL: https://www.sciencedirect.com/science/article/pii/S2589152919301516?via=ihub
• Weiser M., Chater RJ., Shollock BA., Virtanen S.:
  Transport mechanisms during the high-temperature oxidation of ternary γ/γ′ Co-base model alloys
  In: npj Materials Degradation 3 (2019), S. 1-11
  ISSN: 2397-2106
  DOI: 10.1038/s41529-019-0096-z
• Weiser M., Galetz MC., Zschau HE., Zenk C., Neumeier S., Göken M., Virtanen S.:
  Influence of Co to Ni ratio in γ′-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C
  In: Corrosion Science (2019)
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2019.05.007
• Weiß L., Wensing M., Engl N., Siegel F., Tilinski M., Zülow D., Passily L.:
  Local Heat Transfer and Interdependency of Piston Material, Spray and Combustion in High Power Diesel Engines
  Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Fraunhofer Forschungscampus Waischenfeld, 16. Juli 2019 - 17. Juli 2019)
• Wurmshuber M., Doppermann S., Wurster S., Kiener D.:
  Ultrafine-grained Tungsten by High-Pressure Torsion - Bulk precursor versus powder processing route
  40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D
  DOI: 10.1088/1757-899X/580/1/012051
• Zenk C., Gibson JS., Maier-Kiener V., Neumeier S., Göken M., Korte-Kerzel S.:
  Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements
  In: Acta Materialia 181 (2019), S. 385-398
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.09.008
• Zhou H., Huang C., Sha X., Xiao L., Ma X., Höppel HW., Göken M., Wu X., Ameyama K., Han X., Zhu Y.:
  In-situ observation of dislocation dynamics near heterostructured interfaces
  In: Materials Research Letters 7 (2019), S. 376-382
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2019.1616330

2018

• Bachmann J., Göken M., Höppel HW.:
  Fatigue of low alloyed carbon steels in the HCF/VHCF-regimes
  In: Hans-Jürgen Christ (Hrsg.): Fatigue of Materials at Very High Numbers of Loading Cycles, Wiesbaden: Springer Spektrum, 2018, S. 1-23
  ISBN: 9783658245306
  DOI: 10.1007/978-3-658-24531-3_1
• Barr CM., Felfer P., Cole JI., Taheri ML.:
  Observation of oscillatory radiation induced segregation profiles at grain boundaries in neutron irradiated 316 stainless steel using atom probe tomography
  In: Journal of Nuclear Materials 504 (2018), S. 181-190
  ISSN: 0022-3115
  DOI: 10.1016/j.jnucmat.2018.01.053
• Biggemann J., Diepold B., Pezoldt M., Stumpf M., Greil P., Fey T.:
  Automated 3D assembly of periodic alumina-epoxy composite structures
  In: Journal of the American Ceramic Society (2018)
  ISSN: 0002-7820
  DOI: 10.1111/jace.15586
• Blum W.:
  Discussion: Activation volumes of plastic deformation of crystals
  In: Scripta Materialia 146 (2018), S. 27-30
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2017.10.029
• Carton-Cordero M., Campos M., Freund L., Kolb M., Neumeier S., Göken M., Torralba JM.:
  Microstructure and compression strength of Co-based superalloys hardened by γ′ and carbide precipitation
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 734 (2018), S. 437-444
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.08.007
• Cormier J., Rae C., Neumeier S., Hardy M., Reed R.:
  Superalloys and Their Applications Foreword
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), S. 3763-3763
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4803-0
  (anderer)
• Feldner P., Merle B., Göken M.:
  Superplastic deformation behavior of Zn-22% Al alloy investigated by nanoindentation at elevated temperatures
  In: Materials & Design 153 (2018), S. 71-79
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.05.008
• Felfer P., Cairney J.:
  Advanced concentration analysis of atom probe tomography data: Local proximity histograms and pseudo-2D concentration maps
  In: Ultramicroscopy 189 (2018), S. 61-64
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2018.03.011
• Felfer P., Sandfeld S.:
  Digitalisation in Materials Science – Combining Experiments and Simulation Across Length Scales
  In: Praktische Metallographie 55 (2018), S. 492-
  ISSN: 0032-678X
  DOI: 10.3139/147.018081
• Felfer P., Stephenson LT., Li T.:
  Atom Probe Tomography
  In: Praktische Metallographie 55 (2018), S. 515-526
  ISSN: 0032-678X
  DOI: 10.3139/147.110543
• Freund L., Stark A., Kirchmayer A., Schell N., Pyczak F., Göken M., Neumeier S.:
  The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), S. 4070-4078
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4757-2
• Freund L., Stark A., Pyczak F., Schell N., Göken M., Neumeier S.:
  The grain boundary pinning effect of the mu phase in an advanced polycrystalline γ/γ′ Co-base superalloy
  In: Journal of Alloys and Compounds 753 (2018), S. 333-342
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2018.04.204
• Freund L., Stark A., Pyczak F., Schell N., Göken M., Neumeier S.:
  The grain boundary pinning effect of the μ phase in an advanced polycrystalline γ/γ′ Co-base superalloy
  In: Journal of Alloys and Compounds 753 (2018), S. 333-342
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2018.04.204
• Gulden F., Gramstat S., Stich A., Höppel HW., Tetzlaff U.:
  Properties and Limitation of an Oxide Coated Aluminum Brake Rotor
  In: SAE Technical Papers (2018), Art.Nr.: 2018-01-1877
  ISSN: 0148-7191
  DOI: 10.4271/2018-01-1877
• Houlle F., Walsh F., Prakash A., Bitzek E.:
  Atomistic Simulations of Compression Tests on gamma-Precipitate Containing Ni3Al Nanocubes
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), S. 4158-4166
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4706-0
• Huang CX., Wang YF., Ma XL., Yin S., Höppel HW., Göken M., Wu XL., Gao HJ., Zhu YT.:
  Interface affected zone for optimal strength and ductility in heterogeneous laminate
  In: Materials Today 21 (2018), S. 713-719
  ISSN: 1369-7021
  DOI: 10.1016/j.mattod.2018.03.006
• Khansur NH., Eckstein U., Benker L., Deisinger U., Merle B., Webber KG.:
  Room temperature deposition of functional ceramic films on low-cost metal substrate
  In: Ceramics International 44 (2018), S. 16295-16301
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2018.06.027
• Kimmel AC., Malkowski TF., Griffiths S., Hertweck B., Steigerwald T., Freund L., Neumeier S., Göken M., Speck JS., Schlücker E.:
  High-temperature corrosion of Inconel (R) Alloy 718, Haynes (R) 282 (R) Alloy and CoWAlloy1&2 in supercritical ammonia/ammonium chloride solutio
  In: Journal of Crystal Growth 498 (2018), S. 289-300
  ISSN: 0022-0248
  DOI: 10.1016/j.jcrysgro.2018.06.018
• Kolb M., Freund L., Fischer F., Povstugar I., Makineni SK., Gault B., Raabe D., Müller J., Spiecker E., Neumeier S., Göken M.:
  On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys
  In: Acta Materialia (2018), S. 247-254
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.12.020
• Kümmel F., Diepold B., Prakash A., Höppel HW., Göken M.:
  Enhanced monotonic and cyclic mechanical properties of ultrafine-grained laminated metal composites with strong and stiff interlayers
  In: International Journal of Fatigue 116 (2018), S. 379-387
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2018.06.043
• Kümmel F., Diepold B., Sauer KF., Schunk C., Prakash A., Höppel HW., Göken M.:
  High Lightweight Potential of Ultrafine-Grained Aluminum/Steel Laminated Metal Composites Produced by Accumulative Roll Bonding
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800286
• Li T., Kasian O., Cherevko S., Zhang S., Geiger S., Scheu C., Felfer P., Raabe D., Gault B., Mayrhofer K.:
  Atomic-scale insights into surface species of electrocatalysts in three dimensions
  In: Nature Catalysis 1 (2018), S. 300-305
  ISSN: 2520-1158
  DOI: 10.1038/s41929-018-0043-3
• Liebig JP., Krauß S., Göken M., Merle B.:
  Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression
  In: Acta Materialia 154 (2018), S. 261-272
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.05.037
• Macauley C., Fernandez AN., Van Sluytman JS., Levi CG.:
  Phase equilibria in the ZrO2-YO1.5-TaO2.5 system at 1250 degrees C
  In: Journal of the European Ceramic Society 38 (2018), S. 4523-4532
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.06.010
• Makineni SK., Kumar A., Lenz M., Kontis P., Meiners T., Zenk C., Zaefferer S., Eggeler G., Neumeier S., Spiecker E., Raabe D., Gault B.:
  On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy
  In: Acta Materialia (2018), S. 362-371
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.05.074
• Makineni SK., Lenz M., Kontis P., Li Z., Kumar A., Felfer P., Neumeier S., Herbig M., Spiecker E., Raabe D., Gault B.:
  Correlative Microscopy-Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys
  In: JOM Journal of the Minerals, Metals and Materials Society 70 (2018), S. 1736-1743
  ISSN: 1047-4838
  DOI: 10.1007/s11837-018-2802-7
• Makineni SK., Lenz M., Kontis P., Li Z., Kumar A., Felfer P., Neumeier S., Herbig M., Spiecker E., Raabe D., Gault B.:
  Correlative Microscopy—Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys
  In: JOM Journal of the Minerals, Metals and Materials Society (2018), S. 1-8
  ISSN: 1047-4838
  DOI: 10.1007/s11837-018-2802-7
• Makineni SK., Lenz M., Neumeier S., Spiecker E., Raabe D., Gault B.:
  Elemental segregation to antiphase boundaries in a crept CoNi-based single crystal superalloy
  In: Scripta Materialia (2018), S. 62-66
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2018.07.042
• Mccarroll I., Scherrer B., Felfer P., Moody MP., Cairney JM.:
  Interpreting Atom Probe Data from Oxide-Metal Interfaces
  In: Microscopy and Microanalysis 24 (2018), S. 342-349
  ISSN: 1431-9276
  DOI: 10.1017/S1431927618012370
• Medvedev AE., Lapovok R., Koch E., Höppel HW., Göken M.:
  Optimisation of interface formation by shear inclination: Example of aluminium-cooper hybrid produced by ECAP with back-pressure
  In: Materials & Design 146 (2018), S. 142-151
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.03.021
• Medvedev AE., Lapovok R., Koch E., Höppel HW., Göken M.:
  Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure
  In: Materials & Design 146 (2018), S. 142-151
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.03.021
• Merle B., Höppel HW.:
  Microscale High-Cycle Fatigue Testing by Dynamic Micropillar Compression Using Continuous Stiffness Measurement
  In: Experimental Mechanics 58 (2018), S. 465-474
  ISSN: 0014-4851
  DOI: 10.1007/s11340-017-0362-3
• Merle B., Kraus X., Tallawi M., Scharfe B., El Fray M., Aifantis KE., Boccaccini AR., Göken M.:
  Dynamic mechanical characterization of poly(glycerol sebacate)/poly (butylene succinate-butylene dilinoleate) blends for cardiac tissue engineering by flat punch nanoindentation
  In: Materials Letters 221 (2018), S. 115-118
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2018.03.051
• Möller J., Bitzek E.:
  Atomic-scale modeling of elementary processes during the fatigue of metallic materials: from crack initiation to crack-microstructure interactions
  In: Christ, Hans-Jürgen (Hrsg.): Fatigue of Materials at Very High Numbers of Loading Cycles - Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment, Wiesbaden: Springer Spektrum, 2018
  ISBN: 978-3-658-24531-3
  DOI: 10.1007/978-3-658-24531-3_2
  URL: https://www.springer.com/de/book/9783658245306
• Möller J., Bitzek E., Janisch R., ul Hassan H., Hartmaier A.:
  Fracture ab initio: A force-based scaling law for atomistically informed continuum models
  In: Journal of Materials Research 33 (2018), S. 3750-3761
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2018.384
  URL: https://www.cambridge.org/core/journals/journal-of-materials-research/article/fracture-ab-initio-a-forcebased-scaling-law-for-atomistically-informed-continuum-models/077AFC469E3C82F3D1A537EA83AEF5F6#
• Möller J., Mrovec M., Bleskov I., Neugebauer J., Hammerschmidt T., Drautz R., Elsaesser C., Hickel T., Bitzek E.:
  {110} planar faults in strained bcc metals: Origins and implications of a commonly observed artifact of classical potentials
  In: Physical Review Materials 2 (2018)
  ISSN: 2475-9953
  DOI: 10.1103/PhysRevMaterials.2.093606
• Preiß E., Gannott F., Göken M., Merle B.:
  Scaling of the fracture toughness of freestanding metallic thin films with the yield strength
  In: Materials Research Letters 6 (2018), S. 607-612
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2018.1520749
• Schunk C., Nitschky M., Höppel HW., Göken M.:
  Superior Mechanical Properties of Aluminum–Titanium Laminates in Terms of Local Hardness and Strength
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800546
• Volz N., Zenk C., Cherukuri R., Kalfhaus T., Weiser M., Makineni SK., Betzing C., Lenz M., Gault B., Fries SG., Schreuer J., Vassen R., Virtanen S., Raabe D., Spiecker E., Neumeier S., Göken M.:
  Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2018), S. 1-11
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4705-1
• Wurmshuber M., Frazer D., Bachmaier A., Wang Y., Hosemann P., Kiener D.:
  Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag
  In: Materials & Design 160 (2018), S. 1148-1157
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.11.007
• Xue F., Zenk C., Freund L., Hoelzel M., Neumeier S., Göken M.:
  Double minimum creep in the rafting regime of a single-crystal Co-base superalloy
  In: Scripta Materialia 142 (2018), S. 129-132
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2017.08.039

2017

• Ast J., Göken M., Durst K.:
  Size-dependent fracture toughness of tungsten
  In: Acta Materialia 138 (2017), S. 198-211
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.07.030
• Baranova P., Bitzek E.:
  Influence of Atomic-scale Heterogeneties on Fracture Behavior of B2 NiAl
  In: 14th International Conference on Fracture (ICF 14) 2017
• Bitzek E., Baranova P., Möller J.:
  3D Aspects of Fracture and Effects due to Crack Front Curvature
  In: 14th International Conference on Fracture (ICF 14) 2017
• Kral P, Dvorak J, Kvapilova M, Blum W, Sklenicka V:
  The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper
  In: Materials Letters 188 (2017), S. 235-238
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2016.11.002
• Eder K., Felfer P., Gault B., Ceguerra AV., La Fontaine A., Masters AF., Maschmeyer T., Cairney JM.:
  A New Approach to Understand the Adsorption of Thiophene on Different Surfaces: An Atom Probe Investigation of Self-Assembled Monolayers
  In: Langmuir 33 (2017), S. 9573-9581
  ISSN: 0743-7463
  DOI: 10.1021/acs.langmuir.7b01820
• Feldner P., Merle B., Göken M.:
  Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation
  In: Journal of Materials Research 32 (2017), S. 1466-1473
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.69
• Fischer C., Seefried A., Merle B., Göken M., Drummer D.:
  Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time
  In: Polymer Engineering and Science 57 (2017), S. 121-128
  ISSN: 0032-3888
  DOI: 10.1002/pen.24394
• Freund L., Giese S., Schwimmer D., Höppel HW., Neumeier S., Göken M.:
  High temperature properties and fatigue strength of novel wrought gamma/gamma' Co-base superalloys
  In: Journal of Materials Research 32 (2017), S. 4475-4482
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.315
• Freund L., Messe OMDM., Barnard JS., Göken M., Neumeier S., Rae CMF.:
  Segregation assisted microtwinning during creep of a polycrystalline L1(2)-hardened Co-base superalloy
  In: Acta Materialia 123 (2017), S. 295-304
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.10.048
• Ghanem M., Göken M., Merle B.:
  Plane-strain bulge testing of thin films under compressive residual stresses
  In: Surface & Coatings Technology 327 (2017), S. 167-173
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2017.08.004
• Guenole J., Prakash A., Bitzek E.:
  Atomistic simulations of focused ion beam machining of strained silicon
  In: Applied Surface Science 416 (2017), S. 86-95
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2017.04.027
• Gulden F., Höppel HW., Göken M., Stich A., Gramstat S.:
  Fundamental Investigations of Aluminium Matrix Composite Brake Rotors for the Use in Passenger Cars
  In: EuroBreak 2017 (EB2017-MDS-026) 2017
• Göken M., Eggeler G., Zhu Y., Lu L.:
  MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ADVANCED METALLIC ALLOYS IN HONOR OF PROF. HAEL MUGHRABI - PART B - HIGH TEMPERATURE AND NANOMATERIALS Introduction
  In: Journal of Materials Research 32 (2017), S. 4463-4465
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.469
• Höppel HW.:
  Ultrafine-grained Metals
  MDPI Basel, 2017
  ISBN: 978-3-03842-524-3
• Höppel HW., Goik P., Krechel C., Göken M.:
  Ex and in situ investigations on the role of persistent slip bands and grain boundaries in fatigue crack initiation
  In: Journal of Materials Research 32 (2017), S. 4276-4286
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.313
• Iqbal F., Pyczak F., Neumeier S., Göken M.:
  Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 689 (2017), S. 11-16
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.02.017
• Kolb M., Zenk C., Kirzinger A., Povstugar I., Raabe D., Neumeier S., Göken M.:
  Influence of rhenium on γ′-strengthened cobalt-base superalloys
  In: Journal of Materials Research 32 (2017), S. 2551-2559
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.242
• Kümmel F., Höppel HW., Göken M.:
  Layer architecture and fatigue life of ultrafine-grained laminated metal composites consisting of different aluminum alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 702 (2017), S. 406-413
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.06.105
• Kümmel F., Tegtmeier TS., Höppel HW., Göken M.:
  Optimized layer architecture for an extended fatigue life of ultrafine-grained AA1050/AA5005 laminated metal composites
  In: IOP Conference Series: Materials Science and Engineering 194 (2017), S. 012036
  ISSN: 1757-8981
  DOI: 10.1088/1757-899X/194/1/012036
• Leitner (Babinsky) K., Felfer P., Holec D., Cairney J., Knabl W., Lorich A., Clemens H., Primig S.:
  On grain boundary segregation in molybdenum materials
  In: Materials & Design 135 (2017), S. 204-212
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2017.09.019
• Merle B., Maier-Kiener V., Pharr GM.:
  Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation
  In: Acta Materialia 134 (2017), S. 167-176
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.05.036
• Mikschl F., Merle B., Baum M., Heberle J., Göken M., Schmidt M.:
  Micromechanical characterization of laser consolidated nanoparticle ITO layers
  In: Thin Solid Films 642 (2017), S. 214-218
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2017.09.046
• Mousavi M., Guenole J., Baranova P., Bitzek E., Korsunsky AM.:
  Atomistic Simulation of Cracks versus Generalized Continua
  In: 14th International Conference on Fracture (ICF 14) 2017
• Prakash A., Bitzek E.:
  Idealized vs. Realistic Microstructures: An Atomistic Simulation Case Study on γ/γ′ Microstructures
  In: Materials 10 (2017)
  ISSN: 1996-1944
  DOI: 10.3390/ma10010088
• Prakash A., Weygand D., Bitzek E.:
  Influence of grain boundary structure and topology on the plastic deformation of nanocrystalline aluminum as studied by atomistic simulations
  In: International Journal of Plasticity 97 (2017), S. 107-125
  ISSN: 0749-6419
  DOI: 10.1016/j.ijplas.2017.05.11
• Preiß E., Merle B., Göken M.:
  Understanding the Extremely Low Fracture Toughness of Freestanding Gold Thin Films by In-situ Bulge Testing in an AFM
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 691 (2017), S. 218-225
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.03.037
  URL: http://www.sciencedirect.com/science/article/pii/S0921509317303271
• Rehman HU., Burst K., Neumeier S., Sato A., Reed R., Göken M.:
  On the temperature dependent strengthening of nickel by transition metal solutes
  In: Acta Materialia 137 (2017), S. 54-63
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.05.038
• Schwimmer D., Stich A., Höppel HW.:
  Possibilities for Improving the Heat Resistance of Cylinder Head Alloys based on AlSi7MgCu0.5 and AISi10MgCu0.5
• Shrestha S., Fischer R., Matt G., Feldner P., Michel T., Osvet A., Levchuk I., Merle B., Golkar S., Chen H., Tedde SF., Schmidt O., Hock R., Ruehrig M., Göken M., Heiß W., Anton G., Brabec C.:
  High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers
  In: Nature Photonics 11 (2017), S. 436-+
  ISSN: 1749-4885
  DOI: 10.1038/NPHOTON.2017.94
• Vierneusel B., Benker L., Tremmel S., Göken M., Merle B.:
  Isolating the effect of residual stresses on coating wear by a mechanical stress relaxation technique
  In: Thin Solid Films 638 (2017), S. 159 - 166
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2017.06.016
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5a6af86239b18
• Wang L., Zenk C., Stark A., Felfer P., Gabrisch H., Göken M., Lorenz U., Pyczak F.:
  Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys
  In: Acta Materialia 137 (2017), S. 36-44
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.07.018
• Xiao Y., Wehrs J., Ma H., Al-Samman T., Korte-Kerzel S., Göken M., Michler J., Spolenak R., Wheeler JM.:
  Investigation of the deformation behavior of aluminum micropillars produced by focused ion beam machining using Ga and Xe ions
  In: Scripta Materialia 127 (2017), S. 191-194
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2016.08.028
• Zenk C., Povstugar I., Li R., Rinaldi F., Neumeier S., Raabe D., Göken M.:
  A novel type of Co-Ti-Cr-base γ/γ′ superalloys with low mass density
  In: Acta Materialia 135 (2017), S. 244-251
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.06.024
• Zietara M., Neumeier S., Göken M., Czyrska-Filemonowicz A.:
  Characterization of γ and γ′ Phases in 2nd and 4th Generation Single Crystal Nickel-Base Superalloys
  In: Metals and Materials International 23 (2017), S. 126-131
  ISSN: 1598-9623
  DOI: 10.1007/s12540-017-6109-y